High separation nanofiber matrix High dirt holding capacity Sanitizable and sterilizable Thermowelded construction EC listed materials for food contact FDA listed material per CFR21 Vinotrak is especially designed to remove microorganisms . Vinotrak filter element is manufactured with an innovative filter media made of polypropylene nanofiber with dimensions that varies from 0,5 to 0,8 micron supported by a borosilicate microfiber. The controlled dimension of these fibers provides high reliable performances in bacteria , yeast, molds and macro colloids retention. The microbiologic stabilization is reached using a single stadium of filtration. It can be used as an high efficiency pre-filter in case there is a second stadium of final filtration equipped with sterilizing membranes. Test conduct in labs as well as on site proves that Vinotrak filter element dramatically increases the final membrane service life giving a significant cost reduction to the process. Typical are wine, beer, liquors in general filtration process and in all beverages applications. MATERIALS OF CONSTRUCTION Filter media Nanofiber matrix of polypropylene with microfibers of borosilicate Upstream supports Downstream supports Internal core External cage EC DIRECTIVE FOOD SAFETY Vinotrak filter elements meet (EU) regulation 10/2011 and its subsequent amendments and regulations (EC) 1935/2004 and 1895/2005. RECOMMENDED OPERATING CONDITIONS - max. continuous temperature - max. cumulative time of steam sterilization 40 hours at 121 °C (with cycles of 30 minutes) - sanitization with hot water - sanitization with chemicals can be sanitized by standard chemical agents 2 % NaOH Solution at room temperature - recommended change out differential pressure 2,0 bar at 25 °C MAX WATER FLOW RATE 10” CARTRIDGE l/h FILTRATION RATING IN LIQUIDS MICROBIOLOGICAL RETENTION CODICE NTC

WATER FLOW RATE FOR 10" CARTRIDGE VINOTRAK ORDERING INFORMATION Data contained in this bulletin are informative and subject to change without notice. User is responsible for determining whether the product is fit for particular purpose and suitable for User's method of application. Bea Technologies Spa Via Newton, 4 - 20016 Pero (Milano) ITALY