Catalog excerpts
High chemical compatibility High dirt holding capacity Available in several configurations Thermowelded construction up to 40” EC-listed materials for Food contact FDA-listed materials per CFR21 Steamable and sanitizable TOPLIFE TPR is manufactured with polypropylene. The filter media is obtained by winding around the internal core several polypropylene layers, having different porosity and permeability from external to internal; the outer section retains larger particles while the inner section provides filtration rating with efficiency of 99,98%. The different consistency of the layers allows to manufacture cartridges with filtration ratings larger than 10 microns. TOPLIFE TPR with external cage is recommended in presence of pulsation flow or operating temperature above 50°C. The high chemical compatibility of the polypropylene allows the use both in industrial general applications and Food&Beverage applications; PH grade, prefluxed with non-pyrogenic water and with certification of quality, is available for pharmaceutical applications. MATERIALS OF CONSTRUCTION Filter media Upstream supports Downstream supports Internal Core External Cage extruded polypropylene FOOD-SAFETY TOPLIFE TPR filter elements materials meet (EU) regulation 10/2011 and its amendments, regulations (EC) 1935/2004 and 1895/2005. BIO-SAFETY Specific for “PH” grade: the filter meets USP “Water for injection” requirements for particle release and the effluent is Non-Pyrogenic per USP Bacterial Endotoxins (< 0,25 EU/ml). OPERATING CONDITIONS - max. continuous temperature - steam sterilization - sanitization with hot water - recommended change out differential pressure MAX. WATER FLOW RATE FOR 10” CARTRIDGE (l/h)
Open the catalog to page 1WATER FLOW RATE FOR 10” CARTRIDGE TG 0,5 TOPLIFE TPR ORDERING INFORMATION DOE: double open end with thermobonded Polyetilene gaskets. SOE: open end with (1) O-Ring 2.20. Blind end with flat top. SOE: open end with (2) O -Ring 2.222. Blind end with flat top. FILTRATION RATING DOE: double open end with flat gaskets. Prefluxed with nonpyrogenic water; Quality Certification in the box. SOE: open end with (2) O -Ring 2.222. Blind end with fin. 203-207-208-212 With AISI 316 stainless steel ring NOMINAL LENGTH With external cage SOE: open end with (2) O -Ring 2.222 and 3 bayonet locks. Blind end...
Open the catalog to page 2All BEA Technologies S.p.A. catalogs and technical brochures
-
Cleartrak
2 Pages
-
Biodene
2 Pages
-
STP-R
2 Pages
-
Provent PTV
2 Pages
-
Vinotrak
2 Pages
-
Nanotrak
2 Pages
-
Qualikap QKP-P
2 Pages
-
Polyver PLV
2 Pages
-
Novatrak
2 Pages
-
Bioklaris Water
2 Pages
-
Bioklaris Beer
2 Pages
-
Beamesh
2 Pages
-
Beafine
2 Pages
-
BeaFelt
2 Pages
-
Polex
2 Pages
-
OIL SEP
2 Pages
-
Mikrocell
2 Pages
-
Duplofelt
2 Pages