WOUND FILTER CARTRIDGE MIKRO-CELL wound cartridge is very appreciated due to high dirt holding capacity and to the rugged construction, which allow to face different applications in liquid and gas filtration. CONSTRUCTION MIKRO-CELL filter element is obtained from winding up selected high quality yars over a supporting core, which give strength under working severe conditions. In the winding operation some fibers are laid across the passageway and locked by succeeding layers. This process produces the formation of thousands of channels with a controlled porosity decreasing from the outside section to the inner layer. Progressive removal of particles from cartridge surface to center core provides TRUE DEPTH FILTRATION AND HIGH DIRT HOLDING CAPACITY. MAXIMUM DIFFERENTIAL PRESSURE MIKRO-CELL cartridges are capable of withstanding a differential pressure of 5,0 bar (0,5 MPa). It is recommended not to overcome 2,0 bar ( 0,2 MPa) for critical applications. MAXIMUM WORKING TEMPERATURE POLYPROPYLENE

MIKRO-CELL ORDERING CODE MC - FILTER MEDIA INTERNAL CORE MATERIAL Cotton blanked Stainless steel AISI 304 End caps polypropylene g ask e ts up request Polypropylene prewashed Fiber/ polypropylene FILTRATION GRADE micron CORE COVERING SLEEVE Stainless steel AISI 316 NOMINAL EXTERNAL DIAMETER mm NOMINAL INTERNAL DIAMETER mm *DOE open standard (2 fields) 2A9** ** Configuration SOE (4 fields) Es. 2071 = 10” config. 7 Es. 2073 = 30” config. 7 Data contained in this bulletin are informative and subject to change without notice. User is responsible for determining whether the product is fit for particular...