Biodene
2Pages

BIODENE High performance Hydrophilic PVDF • • • • • • Easy integrity testable in situ Repeatedly steamable in situ and in autoclave Thermowelded construction EC-listed materials for Food contact FDA-listed materials per 21 CFR Bio-Safety per USP—Plastics The new BIODENE filter element is a perfect combination between the PVDF membrane with enhanced hydrophilic characteristic and the polypropylene stratification with its high mechanical resistance. The BIODENE filter element has been designed to meet the high standard quality and safety requirements for the most critical application of oenology and beverages applications. This filter element assures the microbiology stability and remove all the contaminants not welcome during the bottling activity, keeping the original color, flavor and scent of the filtered product. The controlled porosity together with the high resistance to heat sterilization, the chemical compatibility and the resistance to mechanical strengths are the highlights of this new filter elements series. Its enhanced service life and the easy regenerations activity even using soda, contributes to a great cost reduction specially when treating fluids with high colloidal burden. Typical applications are all the soft drinks, water, wine, cider and raw beer. The manufacturing is performed in a controlled environment; all the filter elements are 100% integrity tested and verified in production. The filter element is available in 0.2 , 0.45 and 0.65 micron configuration. MATERIALS OF CONSTRUCTION Filter media Hydrophilic PVDF Upstream supports Downstream supports Internal Core External Cage FOOD-SAFETY BIODENE filter element materials meet (EU) regulation 10/2011 and its amendments, regulations (EC) 1935/2004 and 1895/2005. BIO-SAFETY Filter media and components pass USP CLASS VI Biological Reactivity and Chemical-Physical tests for USP plastics. QUALITY STANDARDS Produced under a certified Quality System to guarantee traceability of manufacturing records and integrity testing results. RECOMMENDED OPERATING CONDITIONS - max. continuous temperature - max. cumulative time of steam sterilization 80 hours at 125 °C with cycles of 60 minutes />100 hours at 121°C - sanitization with hot water - sanitization with chemicals Can be sanitized by standard chemical agents - recommended change out differential pressure ABSOLUTE FILTRATION RATING IN LIQUIDS MAX. DECAY VALUE * 8 of 30” CARTRIDGES ACCEPTABLE LIMIT FOR DIFFUSION FLOW TEST WITH WATER FOR 10” CARTRIDGE (ml/min) * The values are related to 5 minutes and are indicative as they depend on the hou

BACTERIAL RETENTION MAX FLOW RATE FOR 30” CARTRIDGE FILTRATION RATING CODE CODE Oenococcus oeni/ Saccharomyces cerevisiae / Brettanomyces bruxellensis / Lactobacilius brevis / Oocystes cryptosporidium / Giardia / Pediococcus damnosus Saccharomyces cerevisiae/ Brettanomyces bruxellensis Pseudomonas aeruginosa / Escherichia coli / Enterobacteriacee WATER FLOW RATE CURVES FOR 10” ELEMENT 0,3 BIODENE ORDERING INFORMATION Hydrophilic PVDF SOE: open end with (2) O-Ring 2.222. Blind end with flat top. ABSOLUTE FILTRATION RATING micron PACKING TYPE SOE: open end with (2) O-Ring 2.226 and 2 bayonet...