Beafelt- FELT LIQUID FILTER BAGS • Micron ratings from 1 to 200 • 7 industry standard sizes • Good chemical compatibility • High flow- low pressure media • Sewn or welded construction • Special features & materials available • Choice of metal ring tops or molded tops FELT MATERIALS Felt filter bag materials are made from synthetic fibers in polypropylene or polyester. The proper combination of fiber diameters, weights and thickness results in an economical depth type filter media. Polypropylene & polyester bags are supplied with a glazed finish to reduce fiber • High dirt holding capacity • Ability to remove both solid • Glazed finish on polyester & polypropylene reduces fiber Advantages of Felt Filter Media Standard ring bags have a galvanized steel ring (stainless steel optional) sewn in the top of the bag. They are supplied with sewn seams standard. Molded top filter bags have a plastic top welded to a sewn or all welded filter bag. Standard felt bags are single layer of needle punched felt. OEPTH FELT FltTEH MEDIA TRAPS OIRT ("ARTICLES MOLDED TOPS FILTER BAG 'A'TH MOLOE 0 TOP JUST BASKET HOLDER FILTER BAG WITH MOLDED TOP All welded bags are available in polyester felt for sizes 1 & 2 with molded plastic tops. Advantages include: • There are no needle holes • No sewing thread is used • The glazed finish and fused edges of the bags greatly reduce or eliminate fiber

PRESSURE DROP DATA The graph shows the delta P produced by a #2 size bag for water, 1 cps @ 68° F. The pressure drop is specific to the type of bag, the micron rating and flow rate for the filter bag only. It does not include the pressure drop caused by the housing & basket. Max. delta P: 1.5 bar. Bea Technologies reserves the right to alter specifications without prior notice Bea Technologies Spa Via Newton, 4 - 20016 Pero (Milano) ITALY