MAB 485 SB
2Pages

Catalog excerpts

MAB 485 Swivel Base The best introduction to the ProfiPLUS category - with the swivel base adjusting feature. How the swivel base works: place the machine roughly in position, activate the magnet, release the adjustment feature and adjust it effortlessly. The swivel base enables the drill to be placed in exactly the right position without needing to hold the whole weight of the machine at the same time. This relief is an additional factor in work safety even when the machine is secured with a chain.

Open the catalog to page 1

The advantages of the MAB 485 Swivel Base > Continuous electronic control of motor output and speed > Drilling with core and twist drills, countersinking, reaming, thread cutting > Two-stage gear unit, non-destructive with oil bath gearbox > With Swivel Base, the adjustment feature for an easy positioning of the drill Motor output: 1150 Watt Swivel Base, adjustment feature: ✓ Magnet size: 84 x 168 x 41.5 mm Quick change drill chuck system: KEYLESS, 19 mm Weldon (3/4") Morse taper: MT 2 fa Permanent internal lubrication: ✓ Full wave control electronics: ✓ °q Swivel Base...

Open the catalog to page 2