RECTANGULAR MAGNETIC ATEX SENSORS

Product catalog summary

General Features:
This document describes a rectangular magnetic ATEX sensor designed for use with pneumatic cylinders. The sensor is ATEX certified for use in hazardous zones 0 and 20, ensuring safety in explosive environments. It is designed to detect the position of a magnetic ring inside a standard pneumatic cylinder with a T slot, remaining recessed for mechanical protection. The sensor uses a reed contact for direct driving of DC (PNP/NPN).

Technical Data:

Working Voltage: 10 ÷ 30 Vdc
Output Logic: Normally open
Contact Resistance Max: 0.1 Ω
Operate Time Max: 1 ms
Release Time Max: 0.4 ms
Temperature Range: -20 ÷ +60°C
Degree of Protection: IP67
Cable Conductor Cross Section: 0.14 mm²
Marking: II 1D Ex iaD 20 T60° C, II 1G Ex ia IIC T6
Certified: IMQ 08 ATEX 010
Standards: EN60079-0, EN60079-11, EN60079-26

Safety Parameters:

Vi Max: 30 Vdc
Ii Max: 100 mA
Pi Max: 750 mW

These sensors must be used with associated apparatus as per instruction manuals.

Materials:

Cable: PVC CEI 20-22 II; 90°C; 300V
Sensor: Plastic

Ordering References:
Different cable lengths can be specified at the end of the code, e.g., BMS/4600A -1 for 1m of cable with connector.

Catalog excerpts

RECTANGULAR MAGNETIC ATEX SENSORS REED CONTACT 2-wire ATEX certified II 1GD for zone 0;20 For pneumatic cylinders Cable output General features: This sensor detects the position of the magnetic ring inside a standard pneumatic cylinder with a T slot. The sensor remains completely recessed and thus mechanically protected. Reed contact provides for a direct driving of DC (PNP/NPN). Technical data: • • • • • • • • • Working voltage: Output logic: Contact resistance max: Operate time max: Release time max: Temperature range: Degree of protection: Cable conductor cross section: Marking: II 1D Ex iaD 20 T60° C II 1G Ex ia IIC T6 • Certified IMQ 08 ATEX 010 • According to: EN60079-0/EN60079-11/EN60079-26 Materials: • Cable: • Sensor: These sensors must be used in conjunction with associated apparatus (See Sect. E) Use in hazardous area according to instruction manuals Cable diameter Rated operational current ( Ie ) ORDERING REFERENCES brown blue Note: different cable lengths must be specified at the end of the code. Ex: BMS/4600A -1 for 1m of cable with connector. BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectr

Open the catalog to page 1

All BDC ELECTRONIC S.r.l. catalogs and technical brochures

Archived catalogs

NAMUR SERIES WITH LED diameters 12 - 18 - 30 mm
1 Page