NAMUR SERIES WITH LED diameters 12 - 18 - 30 mm

Product catalog summary

Overview: This document provides technical specifications and guidelines for cylindrical inductive ATEX sensors housed in metal, manufactured by BDC Electronic. These sensors are designed for use in hazardous environments and are ATEX certified.

Specifications:

Nominal Sensing Distance (Sn): Ranges from 2mm to 15mm with a tolerance of ±10%.
Diameter Options: Available in 12mm, 18mm, and 30mm.
Supply Voltage: 7.7 to 9 Vdc according to NAMUR standards.
Temperature Range: -20°C to +60°C.
Protection Degree: IP67 as per EN60529.
Marking: II 1D Ex iaD 20 T80°C and II 1G Ex ia IIC T6.
Certification: IMQ 08 ATEX 010.

Technical Data:

Max Ripple: 10%.
Consumption at 8.2 V: ≤ 1 mA with metal, ≥ 3 mA without metal.
Repeat Accuracy: 2%.
Electromagnetic Compatibility: Compliant with EN60947-5-2.
Shock and Vibration Resistance: According to EN60068-2-27 and EN60068-2-6.

Safety Parameters:

Vi max: 13.5 V.
Ii max: 60 mA.
Ci max: 100 nF.
Li max: 100 μH.
Pi max: 200 mW.

Materials:

Housing: Nickel-plated brass.
Sensing Face: Plastic.

Installation and Usage: These sensors are intended for use in hazardous areas and must be used with associated apparatus as per the instruction manuals. They are suitable for both flush and non-flush mounting configurations.

Ordering Information: The document provides specific ordering references for different configurations based on body diameter and mounting type.

Catalog excerpts

NAMUR SERIES WITH LED diameters 12 - 18 - 30 mm-1

CYLINDRICAL INDUCTIVE ATEX SENSORS IN METAL HOUSING NAMUR SERIES diameters 12 - 18 - 30 mm • ATEX certified II 1GD for zone 0;20 • Connector output M12x1^ Typical curve Materials: • Housing: • Sensing face: nickel plated brass plastic Technical data: • Supply voltage according NAMUR: 7,7 t 9 Vdc • Consumption at 8,2 V with Rx = 1000 0 with metal: < 1 mA • Max thermal drift of sensing distance Sr: ± 10% • Degree of protection according EN60529: IP67 II 1G Ex ia IIC T6 • Certified IMQ 08 ATEX 010 • Electromagnetic compatibility (EMC) according to EN60947-5-2 • According to: EN60947-5-6/EN60079-0/EN60079-11/EN60079-26 • Shock and vibration resistance according to EN60068-2-27/EN60068-2-6 These sensors must be used in conjunction with associated apparatus (See Sect. E) Use in hazardous area according to instruction manuals ORDERING REFERENCES BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:

Open the catalog to page 1

NAMUR SERIES WITH LED diameters 12 - 18 - 30 mm

NAMUR SERIES WITH LED diameters 12 - 18 - 30 mm

Catalog excerpts

All BDC ELECTRONIC S.r.l. catalogs and technical brochures