NAMUR SERIES diameters 12 - 18 - 30 mm

Product catalog summary

Overview: This document provides technical specifications and ordering information for cylindrical inductive ATEX sensors in metal housing, manufactured by BDC Electronic. These sensors are designed for use in hazardous areas and are ATEX certified.

Specifications:

Nominal Sensing Distance (Sn): Available in 2, 4, 5, 8, 10, and 15 mm with a tolerance of ±10%.
Diameter Options: 12 mm, 18 mm, and 30 mm.
Supply Voltage: 7.7 to 9 Vdc according to NAMUR standards.
Temperature Range: -20°C to +60°C.
Protection Degree: IP67 as per EN60529.
Marking: II 1D Ex iaD 20 T80°C, II 1G Ex ia IIC T6.
Certification: IMQ 08 ATEX 010.
EMC Compliance: EN60947-5-2.

Safety Parameters:

Maximum Voltage (Vi max): 13.5 V.
Maximum Current (Ii max): 60 mA.
Maximum Capacitance (Ci max): 100 nF.
Maximum Inductance (Li max): 100 μH.
Maximum Power (Pi max): 200 mW.

Materials:

Housing: Nickel-plated brass.
Sensing Face: Plastic.

Installation and Usage: The sensors are designed for flush and non-flush mounting and must be used with associated apparatus as per the instruction manuals for hazardous areas.

Ordering Information: The document lists various models with different body diameters and mounting options, along with their respective part numbers.

Catalog excerpts

NAMUR SERIES diameters 12 - 18 - 30 mm-1

CYLINDRICAL INDUCTIVE ATEX SENSORS IN METAL HOUSING NAMUR SERIES diameters 12 - 18 - 30 mm • ATEX certified II 1GD for zone 0;20 • Connector output M12x1^ Typical curve Materials: • Housing: • Sensing face: nickel plated brass plastic Technical data: • Supply voltage according NAMUR: 7,7 t 9 Vdc • Consumption at 8,2 V with Rx = 1000 0 with metal: < 1 mA • Max thermal drift of sensing distance Sr: ± 10% • Degree of protection according EN60529: IP67 II 1G Ex ia IIC T6 • Certified IMQ 08 ATEX 010 • Electromagnetic compatibility (EMC) according to EN60947-5-2 • According to: EN60947-5-6/EN60079-0/EN60079-11/EN60079-26 • Shock and vibration resistance according to EN60068-2-27/EN60068-2-6 These sensors must be used in conjunction with associated apparatus (See Sect. E) Use in hazardous area according to instruction manuals ORDERING REFERENCES BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:

Open the catalog to page 1

All BDC ELECTRONIC S.r.l. catalogs and technical brochures

Archived catalogs

NAMUR SERIES WITH LED diameters 12 - 18 - 30 mm
1 Page