*mydirectindustry

EP 500

Product catalog summary

Overview: The EP 500 is a pressure transmitter designed for level measurement via air bubbling. It features a capacitive ceramic sensor and offers a nominal pressure range from 0 to 60 mbar up to 20 bar. The device outputs a 4 to 20 mA signal and is housed in a hat rail housing with programming capabilities via an integrated interface.

Specifications:

Input Pressure Range: Nominal pressure ranges from 0.06 to 20 bar with permissible overpressure up to 40 bar.
Output Signal/Supply: Standard 2-wire output of 4 to 20 mA with a supply voltage of 12 to 32 VDC.
Performance: Accuracy is ≤ ± 0.2% FSO, with a turn-on time of 700 msec and a response time of 120 msec.
Thermal Errors: Thermal error is ≤ ± (0.02 x nominal range / adjusted range) % FSO / 10 K in a compensated range of 0 to 80°C.
Electrical Protection: Includes permanent short-circuit protection and reverse polarity protection.

Materials and Construction:

Pressure Port: Standard material is stainless steel 1.4301, with brass available on request.
Housing: Made from PA6 with options for ABS in version EP 500-500.
Seals and Diaphragm: FKM seals and a ceramic Al2O3 96% diaphragm.

Environmental and Certification:

Certified by Lloyd's Register and Det Norske Veritas/Germanischer Lloyd for temperature, humidity, vibration, and electromagnetic compatibility.
Ingress protection is rated at IP 00.

Miscellaneous:

Function display via green SMD-LED.
Operational life exceeds 100 million pressure cycles.
Adjustability includes electronic damping, offset, span turn down, and pressure unit configuration.

Ordering Information: The EP 500 can be customized with various options for pressure ports, seals, and diaphragms, with specific configurations available upon request.

Catalog excerpts

EP 500 Pressure Transmitter Special application: level measurement via air bubbling Characteristics: ► capacitive ceramic sensor ► nominal pressure range from 0 ... 60 mbar up to 0 ... 20 bar ► output signal 4 ... 20 mA / 2-wire ► hat rail housing ► programming via integrated interface echnical Data BD SENSORS GmbH BD-Sensors-StraBe 1 D - 95199 Thierstein www.bdsensors.com [email protected]

Open the catalog to page 1

3 programming kit has to be ordered separately (software appropriate for Windows®95, 98, 2000, NT Version 4.0 or higher, and XP)

Open the catalog to page 2

hose connection for flexible hoses 0 4 mm

Open the catalog to page 3

Ordering code EP 500 pressure measurement gauge absolute Output Accuracy 0.06 0.16 0.4 1.0 2.0 5.0 10 20 customer 4 ... 20 mA / 2-wire customer 0.2 % customer Mechanical connection hose connection 0 4.5 mm 1 G1/4" EN 837 customer Pressure port stainless steel 1.4301 (304) brass customer consult consult Diaphragm ceramics Al2O3 96% customer Special version standard option customer consult consult 1 hose connection only up to 5 bar © 2013 BD\SENSORS GmbH - The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications...

Open the catalog to page 4

All BD|SENSORS GmbH catalogs and technical brochures

Archived catalogs

BD|SENSORS at a glance
5 Pages