Catalogs >
BD|SENSORS GmbH >
datasheet DCT 553P

datasheet DCT 553P
4Pages

Catalog excerpts

DCT 553P Industrial Pressure Transmitter with IO-Link Interface Process Connections with semi-flush ceramic diaphragm accuracy according to IEC 60770: Standard: 0.35 % FSO Option: 0.25 % FSO Nominal pressure ► from 0 … 40 mbar up to 0 … 20 bar Output signal - IO-Link according to specification V 1.1 data transfer rate 38.4 kbit/sec smart sensor profile The pressure transmitter DCT 553P is used in the food and pharmaceutical industries or in applications where a dead space-free process connection is required. A capacitive ceramic pressure sensor developed in-house is used as the basic sensor, which is characterized by a high overload and excellent surface quality. The special design prevents the condensation inside the pressure transmitter and thus failure in applications with large temperature changes. high purity ceramic 99.9 % AI2O3 diaphragm high overpressure capability The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. hygienic version Preferred areas of use are Food industry Chemical and petrochemical industry different process connections Material and test certificates ► BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein Inspection certificate 3.1 according to EN 10204 Test report 2.2 according to EN 10204

Open the catalog to page 1

DCT 553P Industrial Pressure Transmitter with IO-Link Interface Input pressure range Nominal pressure gauge Nominal pressure absolute Overpressure Burst pressure ≥ Output signal / Supply Standard IO-Link Data transfer Mode Standard Performance Accuracy 1 Switching current (SIO-Mode) Switching frequency Switching cycles Long term stability Turn-on time Response time Measuring rate 1 Technical Data IO-Link (measured value transmission) SIO (switching output) V 1.1 / slave / smart sensor profile COM 2 38.4 kbit/sec SIO / IO-Link IEC 61131-9 standard:   0.35 % FSO option for pN ≥ 0.6 bar:  ...

Open the catalog to page 2

DCT 553P Industrial Pressure Transmitter with IO-Link Interface Technical Data Wiring diagram IO-Link © 2022 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. signal IO-Link Master Pin configuration / electrical connection Electrical connection Supply + Supply – SIO / IO Link Shield Dimensions / mechanical connection (mm / in) * higher pressure ranges on request www.bdsensors.de info@bdsensors.de

Open the catalog to page 3

Output IO-Link / SIO Accuracy standard: option for pN ≥ 0.6 bar: Electrical connection male plug M12x1 (4-pin) / metal customer Mechanical connection G 1 1/2" DIN flush (DIN 3852) Clamp DN 32 (DIN 32676) Clamp DN 50 (DIN 32676) Varivent® DN 40/50 customer Seal FKM EPDM customer Pressure port stainless steel 1.4404 (316L) customer Diaphragm ceramics Al2O3 99.9 % customer Special version standard customer absolute pressure from 0.04 bar up to 0.25 bar on request Varivent® is a brand name of GEA Tuchenhagen GmbH © 2022 BD|SENSORS GmbH - The specifications given in this document represent the...

Open the catalog to page 4

datasheet DCT 553P 4Pages

Catalog excerpts

All BD|SENSORS GmbH catalogs and technical brochures

datasheet DCT 553P
4Pages