Catalogs >
BD|SENSORS GmbH >
data sheet LMP 808

data sheet LMP 808
4Pages

Catalog excerpts

LMP 808 Detachable Plastic Probe Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % Nominal pressure The separable plastic immersion probe LMP 808 was developed for water applications, for level measurements in rivers and for level measurements by fuels and oils designed. The basic element is a precise stainless steel sensor. Since the area of application is often outside a building, great emphasis was placed on overvoltage / lightning protection. Special characteristics To simplify warehousing and Maintenance, the probe head can be separated from the cable part and, if necessary, can be done without time-consuming assembly work can be replaced. cable assembly and sensor head detachable excellent linearity small thermal effect integrated lightning protection and increased overvoltage protection 8 kA gas discharge tube (8/20 µsec); 4 kV surge l-l/l-e according to EN61000-4-5 Fuel and oil fuel storage tank farms biogas plants process water recycling SIL 2 (Safety Integrity Level) according to IEC 61508 / 61511 different kinds of cables and elastomers BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein Water / filtrated sewage ground water level measurement rain spillway basins drinking water systems water treatment plants www.bdsensors.de info

Open the catalog to page 1

LMP 808 Detachable Plastic Probe Technical Data Input pressure range Nominal pressure gauge [bar] 0.1 Level [mH2O] 1 Overpressure [bar] 0.5 Burst pressure ≥ [bar] 1.5 Max. ambient pressure (housing): 20 bar Output signal / Supply Standard Options 3-wire Performance Accuracy Permissible load Influence effects Long term stability Response time 1 nominal pressure < 0.4 bar: nominal pressure ≥ 0.4 bar: option: nominal pressure ≥ 0.4 bar: current 2-wire: Rmax = [(VS – VS min) / 0.02 A] Ω current 3-wire: Rmax = 500 Ω voltage 3-wire: Rmin = 10 kΩ supply: 0.05 % FSO / 10 V ≤ ± 0.1 % FSO / year at...

Open the catalog to page 2

LMP 808 Detachable Plastic Probe Technical Data Wiring diagrams 2-wire-system (current) Supply + Supply – Signal + (only for 3-wire) Shield WH (white) BN (brown) GN (green) GNYE (green-yellow) sensor head and cable detached www.bdsensors.de info@bdsensors.de © 2023 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.

Open the catalog to page 3

stainless steel 1.4435 (316L) customer Electrical connection PVC-cable (grey, Ø 7.4 mm) PUR-cable (black, Ø 7.4 mm) FEP-cable (black, Ø 7.4 mm) customer Accuracy standard for p N ≥ 0.4 bar 0.35 % FSO standard for p N < 0.4 bar 0.5 % FSO option for pN ≥ 0.4 bar 0.25 % FSO customer Cable length in m Special version standard prepared for pipe mounting customer PP-HT customer cable with integrated ventilation tube for atmospheric pressure reference pipe is not part of the supply © 2022 BD|SENSORS GmbH - The specifications given in this document represent the state of engineering at the time of...

Open the catalog to page 4

data sheet LMP 808 4Pages

Catalog excerpts

All BD|SENSORS GmbH catalogs and technical brochures

data sheet LMP 808
4Pages