Catalogs >
BD|SENSORS GmbH >
data sheet LMP 305

data sheet LMP 305
5Pages

Catalog excerpts

LMP 305 Slimline Probe Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure from 0 ... 1 mH2O up to 0 ... 250 mH2O Output signals 2-wire: 4 ... 20 mA others on request A piezoresistiv stainless steel sensor with low thermal error, an excellent linearity and a long term stability, is basis of LMP 305. diameter 19 mm for confined space conditions e. g. in 1" pipes small thermal effect good long term stability The slimline probe LMP 305 with silicon stainless steel sensor is designed for continous level measurement in confined space conditions e. g. 1" pipes. Permissible media are clean or lightly polluted water and thin fluids. excellent linearity Preferred areas of use are Water level measurement in confined space conditions ground water monitoring depth or level measurement in wells and open waters different kinds of cable drinking water system customer specific versions e. g. special pressure ranges level measurement in container BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein www.bdsensors.de info@bd

Open the catalog to page 1

Technical Data Input pressure range Nominal pressure gauge [bar] 0.1 Level [mH2O] 1 Overpressure [bar] 1 Max. ambient pressure (housing): 40 bar Output signal / Supply 2-wire Performance Accuracy 1 accuracy according to IEC 60770 – limit point adjustment (non-linearity, hysteresis, repeatability) permanent no damage, but also no function emission and immunity according to EN 61326 additional external overvoltage protection unit in terminal box KL 1 or KL 2 with atmospheric pressure reference available on request PVC (-5 … 70 °C) PUR (-10 … 70 °C) FEP 4 (-10 … 70 °C) signal line/shield also...

Open the catalog to page 2

Technical Data Pin configuration Electrical connection Supply + Supply – Shield cable colours (IEC 60757) WH (white) BN (brown) GNYE (green-yellow)

Open the catalog to page 3

Technical Data Accessories cable gland M16x1.5 with seal insert (for cable-∅ 4 ... 11 mm) size b D d2 d4 f k n Technical data Suitable for all probes Flange material stainless steel 1.4404 (316L) Material of cable gland standard: brass, nickel plated on request: stainless steel 1.4305 (303); plastic Seal insert material: TPE (ingress protection IP 68) Hole pattern according to DIN 2507 Weight Ordering type Ordering code DN25 / PN40 with cable gland brass, nickel plated ZMF2540 1.4 kg DN50 / PN40 with cable gland brass, nickel plated ZMF5040 3.2 kg DN80 / PN16 with cable gland brass, nickel...

Open the catalog to page 4

Electrical connection PVC-cable (grey, Ø 7.4 mm) PUR-cable (black, Ø 7.4 mm) FEP-cable (black, Ø 7.4 mm) customer Cable length in m Special version standard customer 1 stainless steel 1.4435 (316L) customer Accuracy standard for p N > 0.4 bar standard for p N ≤ 0.4 bar option for pN > 0.4 bar stainless steel 1.4404 (316L) customer shielded cable with integrated ventilation tube for atmospheric pressure reference © 2022 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the...

Open the catalog to page 5

data sheet LMP 305 5Pages

Catalog excerpts

All BD|SENSORS GmbH catalogs and technical brochures

data sheet LMP 305
5Pages