Catalogs >
BD|SENSORS GmbH >
data sheet LMK 809

data sheet LMK 809
4Pages

Catalog excerpts

LMK 809 Plastic Probe for Aggressive Media High Purity Ceramic Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure from 0 ... 0.4 mH2O up to 0 ... 100 mH2O Output signals Basic element of the plastic probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and seal materials are available in order to achieve maximum media compatibility. 2-wire: 4 ... 20 mA 3-wire: 0 ... 10 V others on request Special characteristics ► chemical resistance high overpressure resistance especially for tank level measurement of viscous and aggressive media The plastic submersible probe LMK 809 is designed for continuous level measurement in highly polluted and most of aggressive media. Basic element is a capacitive ceramic sensor. housing material PP-HT or PVDF Preferred areas of use are Sewage waste water treatment water recycling dumpsite Aggressive media level measurement in most of acids and lyes different kinds of cables and elastomers prepared for mounting with pipe BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein

Open the catalog to page 1

Technical Data Input pressure range Nominal pressure gauge [bar] 0.04 Level [mH2O] 0.4 Overpressure [bar] 2 Max. ambient pressure (housing): 10 bar Output signal / Supply Standard Option Performance Accuracy 1 ≤ ± 1 % FSO -20 … 80 °C medium / electronic / environment / storage: permanent no damage, but also no function emission and immunity according to EN 61326 PUR (-25 … 70 °C) black Ø 7.4 mm FEP 4 (-25 … 70 °C) black Ø 7.4 mm TPE-U (-25 … 100 °C) blue Ø 7.4 mm others on request signal line/shield also signal line/signal line: 160 pF/m signal line/shield also signal line/signal line: 1...

Open the catalog to page 2

Technical Data Pin configuration Electrical connection cable colours (IEC 60757) WH (white) BN (brown) GN (green) GNYE (green-yellow) Supply + Supply – Signal + (only for 3-wire) Shield Dimensions (mm / in) prepared for mounting with pipe Accessories Terminal clamp Technical data Suitable for all probes with cable ∅ 5.5 ... 10.5 mm Material of housing standard: steel, zinc plated optionally: stainless steel 1.4301 (304) Material of clamping jaws PA (fibre-glass reinforced) and positioning clips Dimensions (mm) 174 x 45 x 32 Hook diameter 20 mm Weight Ordering type Ordering code Terminal...

Open the catalog to page 3

Accuracy standard: option: FKM EPDM FFKM customer Electrical connection PUR-cable (black, Ø 7.4 mm) FEP-cable (black, Ø 7.4 mm) TPE-U-cable (blue, Ø 7.4 mm) customer Cable length in m Special version standard prepared for pipe R1" customer PP-HT PVDF customer shielded cable with integrated ventilation tube for atmospheric pressure reference pipe is not part of the supply © 2022 BD|SENSORS GmbH - The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.

Open the catalog to page 4

data sheet LMK 809 4Pages

Catalog excerpts

All BD|SENSORS GmbH catalogs and technical brochures

data sheet LMK 809
4Pages