Catalogs >
BD|SENSORS GmbH >
data sheet LMK 808

data sheet LMK 808
4Pages

Catalog excerpts

LMK 808 Detachable Plastic Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure from 0 ... 1 mH2O up to 0 ... 100 mH2O Output signals 2-wire: 4 ... 20 mA others on request The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. Since the level probe is used for level measurement i.a. in river courses, on weir systems or in locks, great emphasis was placed on high overvoltage / lightning protection. In addition, the cable can be protected against bites if necessary. cable assembly and sensor head detachable good long-term stability integrated lightning protection 8 kA gas discharge tube (8/20µsec); 4 kV surge l-l/l-e according to EN61000-4-5 To simplify maintenance work or warehousing, the sensor head can be separated from the cable part and can therefore be replaced if necessary without time-consuming assembly work. Preferred areas of use Water groundwater and level monitoring sea water Sewage waste water treatment water recycling different kinds of elastomer customer specific versions e. g. special pressure ranges mounting accessories BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein

Open the catalog to page 1

LMK 808 Detachable Plastic Probe Technical Data Input pressure range Nominal pressure gauge [bar] 0.1 Level [mH2O] 1 Overpressure [bar] 3 Burst pressure ≥ [bar] 4 Permissible vacuum [bar] -0.2 Max. ambient pressure (housing): 20 bar Output signal / Supply 2-wire Performance Accuracy 1 standard: ≤ ± 0.35 % FSO option: ≤ ± 0.25 % FSO Rmax = [(VS – VS min) / 0.02 A] Ω supply: 0.05 % FSO / 10 V ≤ ± 0.1 % FSO / year at reference conditions up to 1.5 sec ≤ 20 msec 200 Hz others on request load: 0.05 % FSO / kΩ accuracy according to IEC 60770 – limit point adjustment (non-linearity, hysteresis,...

Open the catalog to page 2

LMK 808 Detachable Plastic Probe Technical Data sensor head and cable detached Accessories Terminal clamp Technical data Suitable for all probes with cable ∅ 5.5 ... 10.5 mm Material of housing standard: steel, zinc plated optionally: stainless steel 1.4301 (304) Material of clamping jaws PA (fibre-glass reinforced) and positioning clips Dimensions (mm) 174 x 45 x 32 Hook diameter 20 mm Weight Ordering type Ordering code Terminal clamp, steel, zinc plated Z100528 approx. 160 g Terminal clamp, stainless steel 1.4301 (304) Z100527 www.bdsensors.de info@bdsensors.de © 2023 BD|SENSORS GmbH –...

Open the catalog to page 3

PP-HT customer Electrical connection TPE-U-cable (blue, Ø 7.4 mm) customer Accuracy standard 0.35 % FSO option 0.25 % FSO customer Cable length in m Special version standard customer 1 shielded cable, drinking water suitable, with integrated ventilation tube for atmospheric pressure reference © 2022 BD|SENSORS GmbH - The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.

Open the catalog to page 4

data sheet LMK 808 4Pages

Catalog excerpts

All BD|SENSORS GmbH catalogs and technical brochures

data sheet LMK 808
4Pages