iS 4 Electronic OEM Pressure Switch Pneumatics with IO-Link Interface Applications: Pneumatics Vacuum technology nominal pressure range 0 ... 10 bar compact design IO-Link according to specification V 1.1 Technical Data Input pressure range Nominal pressure gauge Overpressure Output signal / Supply Standard IO-Link Data transfer Mode Standard IO-Link (measured value and status transmission) / VS = 18 ... 30 VDC SIO (switching output), status indication via LED (green) V 1.1 / Slave / Smart Sensor Profile COM2 38.4 kbit/s SIO / IO-Link (COMx) IEC 61131-2, IEC 61131-9 Performance Accuracy 1 Switching current (SIO-Mode) Switching frequency Switching cycles Long term stability Turn-on time Response time Measuring rate ≤ ± 0.5 % FSO max. 200 mA max. 200 Hz > 100 x 106 ≤ ± 0.3 % FSO / year at reference conditions SIO mode: ca. 20 msec SIO mode: < 4 msec 400 Hz accuracy according to IEC 60770 – limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (offset and span) / Permissible temperatures Tolerance band ≤ ± 2 % FSO in compensated range 0 ... 50 °C TC, average ≤ ± 0.4 % FSO / 10 K in compensated range 0 ... 50 °C Permissible temperatures medium / electronics / environment: -25 ... 85 °C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 61326 BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein

iS 4 Electronic OEM Pressure Switch with IO-Link Mechanical stability Vibration Shock Materials Pressure port Housing Seal Sensor Media wetted parts Miscellaneous Media Weight Current consumption Operational life Installation position Ingress protection CE-conformity Wiring diagram Pin configuration Electrical connection (L+) Supply + (L-) Supply – C/Q IO-Link (COMx) / SIO Shield Technical Data aluminium PA 6.6 black NBR silicon, RTV pressure port, seal, sensor compressed air, non-aggressive gases approx. 25 g max. 15 mA 100 million load cycles any IP 54 EMC Directive: 2014/30/EU Dimensions (mm...

iS 4 Electronic OEM Pressure Switch with IO-Link Technical Data IO-Link interface Baud rate Input process data length Minimum cycle time IO-Link version SIO mode COM2 (38.4 kbit/s) 2 byte 5 msec V 1.1 yes The process data length of the sensor is 16 bits. The switch state (BCD1) as well as the current measured values are transmitted. The 14 bits of the measured value are scaled according to the measuring range. 15 bit Signed Bit 2. SIO mode (standard IO mode) In this mode the sensor operates like a normal pressure sensor with standard output signals. The digital output is always on Pin 4 of the...

Pressure Input Signal output suitable for flange installation © 2022 BD|SENSORS GmbH - The specifications given in this document represent the state of engineeringat the time of publishing. We reserve the right to make modifications to the specifications and materials. IO-Link / SIO Electrical connection M8x1 (4-pin) / metal customer Mechanical connection G1/8" internal thread M5 internal thread with slot for O-ring customer Seals NBR customer Special version standard customer