DS 210 Electronic Pressure Switch Without Media Isolation Nominal pressure The electronic pressure switch DS 210 is the successful combination of from 0 ... 10 mbar up to 0 ... 1000 mbar ► intelligent pressure switch digital display Contacts 1, 2 or 4 independent contacts freely configurable and has been specially designed for measuring of very small overpressure and for vacuum applications. Permissible media are gases, pressurized air and thin non aggressive media. Analogue output 2-wire: 4 ... 20 mA 3-wire: 4 … 20 mA / 0 … 10 V others on request As standard the DS 210 offers a PNP-contact and a rotable display module. Additional features like e.g. an intrinsically safe version, max. four contacts and an analogue output complete the profile. indication of measured values on a 4-digit LED display rotatable and configurable display module Preferred areas of use are Plant and machine engineering IS-version Ex ia = intrinsically safe for gases Laboratory techniques customer specific versions BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein

DS 210 Electronic Pressure Switch Input pressure range Nominal pressure gauge Overpressure Burst pressure Contact 1 Standard Options Max. switching current Accuracy of contacts 2 Repeatability Switching frequency Switching cycles Delay time 1 Technical Data 1 PNP contact 2 independent PNP contacts 4 independent PNP contacts (possible with M12x1, 8-pin for 4 ... 20 mA/3-wire; 0 ... 10 V/3-wire on request) 4 ... 20 mA / 2- and 3-wire: contact rating 125 mA, short-circuit resistant; Vswitch = VS − 2V 0 ... 10 V / 3-wire: contact rating 125 mA, short-circuit resistant standard: ≤ ± 0.35 % FSO nominal...

DS 210 Electronic Pressure Switch Miscellaneous Display Technical Data 4-digit, red 7-segment-LED display, digit height 7 mm, range of indication -1999 ... +9999; accuracy 0.1 % ± 1 digit; digital damping 0.3 … 30 sec (programmable); measured value update 0.0 … 10 sec (programmable) 2-wire signal output current: max. 25 mA 3-wire signal output current: approx. 45 mA + signal current 3-wire signal output voltage: approx. 45 mA IP 65 any approx. 180 g 100 million load cycles EMC Directive: 2014/30/EU 2014/34/EU Current consumption (without contacts) Ingress protection Installation position Weight...

DS 210 Electronic Pressure Switch Technical Data © 2024 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. rotatability of display module Mechanical connection (dimensions mm / in)  metric threads and other versions on request www.bdsensors.de info@bdsensors.

Analogue output without 4 … 20 mA / 2-wire 0 … 10 V / 3-wire 4 … 20 mA / 3-wire, adjustable intrinsic safety 4 … 20 mA / 2-wire customer Contact 1 contact 2 contacts 4 contacts Accuracy standard for pN > 0.1 bar: 0.35 % FSO standard for pN ≤ 0.1 bar: 0.5 % FSO customer Electrical connection male plug M12x1 (5-pin) / plastic version male plug M12x1 (8-pin) / plastic version male plug M12x1 (5-pin) / metal version male and female plug ISO 4400 male plug Binder series 723 (5-pin) customer Mechanical connection G1/2" DIN 3852 G1/2" EN 837 G1/4" DIN 3852 G1/4" EN 837 G1/2" DIN 3852 open pressure port...