DS 201P Electronic Pressure Switch Pressure Port with Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure The electronic pressure switch DS 201P is the successful combination of intelligent pressure switch digital display Contacts 1, 2 or 4 independent PNP contacts, freely configurable and is designed for universal applications in the mechanical engineering and other industries where a flush stainless steel diaphragm is necessary. This can be the case, for example, with higher viscous or slightly polluted fluids. For usage with higher media temperature optionally a cooling element up to 300 °C is available. Analogue output 2-wire: 4 ... 20 mA 3-wire: 4 … 20 mA / 0 … 10 V others on request Special characteristics ► indication of measured values on a 4-digit LED display Plant and machine engineering rotatable and configurable display module Food industry IS-version Ex ia = intrinsically safe for gases customer specific versions BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein Preferred used for Viscous and pasty media

DS 201P Electronic Pressure Switch Input pressure ranges Nominal pressure gauge/abs. [bar] Overpressure [bar] Burst pressure ≥ [bar] Contact 1 Standard Options Max. switching current Accuracy of contacts2 Repeatability Switching frequency Switching cycles Delay time 1 Technical Data 1 PNP contact 2 independent PNP contacts 4 independent PNP contacts 4 ... 20 mA / 2- and 3-wire: 0 ... 10 V / 3-Leiter: ≤ ± 0.5 % FSO ≤ ± 0.2 % FSO max. 10 Hz > 100 x 106 0 ... 100 sec (possible with M12x1, 8-pin for 4 ... 20 mA/3-wire; 0 ... 10 V/3-wire on request) contact rating 125 mA, short-circuit resistant;...

DS 201 P Electronic Pressure Switch Technical Data Explosion protection (only for 4 … 20 mA / 2-wire) Approval AX14-DS 201P IBExU06ATEX1050 X zone 1: II 2G Ex ia IIC T4 Gb Safety technical maximum Ui = 28 V, Ii = 93 mA, Pi = 660 mW, C ≈ 0 nF, Li ≈ 0 µH values 8 Max. switching current 70 mA Max. temperatures for -25 ... 70 °C environment Connecting cables cable capacitance: signal line/shield also signal line/signal line: 100 pF/m (by factory) cable inductance: signal line/shield also signal line/signal line: 1 µH/m 8 the real switching current in the application depends on the power supply unit...

DS 201P Electronic Pressure Switch Technical Data Electrical connections (dimensions mm / in) Dimensions (mm / in) rotatability of display module

DS 201 P Electronic Pressure Switch Technical Data  metric threads and other versions on request Cooling element up to 300 °C 6 (optionally) max. temperature depends on the used sealing material, type of seal and installation www.bdsensors.de [email protected] © 2024 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. Mechanical connection (dimensions mm

Pressure Input without 4 … 20 mA / 2-wire 0 … 10 V / 3-wire 4 … 20 mA / 3-wire, adjustable intrinsic safety 4 … 20 mA / 2-wire customer Contact 1 contact 2 contacts 4 contacts Accuracy 0.5 % FSO customer Electrical connection male plug M12x1 (5-pin) / plastic version male plug M12x1 (8-pin) / plastic version male plug M12x1 (5-pin) / metal version male and female plug ISO 4400 male plug Binder series 723 (5-pin) customer Mechanical connection G1/2" DIN 3852 with flush diaphragm G3/4" DIN 3852 with flush diaphragm G1" DIN 3852 with flush diaphragm customer Diaphragm stainless steel 1.4435 (316L)...