Catalogs >
BD|SENSORS GmbH >
data sheet DS 201

data sheet DS 201
6Pages

Catalog excerpts

DS 201 Electronic Pressure Switch Ceramic Sensor Nominal pressure The electronic pressure switch DS 201 is the successful combination of intelligent pressure switch digital display Contacts 1, 2 or 4 independent PNP contacts, freely configurable and has been specially designed for universal usage in industry applications. The DS 201 is available with flush pressure ports for viscous, pasty, and highly polluted media. Analogue output 2-wire: 4 ... 20 mA 3-wire: 4 … 20 mA / 0 … 10 V others on request As standard the DS 201 offers a PNP contact and a rotable display module with 4-digit LED display. Optional versions like e.g. an intrinsically safe version, max. four contacts and an analogue output complete the profile. indication of measured values on a 4-digit LED display rotatable and configurable display module Preferred areas of use are Plant and machine engineering pressure port PVDF Environmental engineering (water – sewage – recycling) IS-version Ex ia = intrinsically safe for gases customer specific versions BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein

Open the catalog to page 1

DS 201 Electronic Pressure Switch Technical Data Max. switching current Accuracy of contacts 3 Repeatability Switching frequency Switching cycles Delay time 1 PNP contact 2 independent PNP contacts 4 independent PNP contacts (possible with M12x1, 8-pin for 4 ... 20 mA/3-wire; 0 ... 10 V/3-wire on request) 4 ... 20 mA / 2- and 3-wire: contact rating 125 mA, short-circuit resistant; VSwitch = VS - 2V 0 ... 10 V / 3-wire: contact rating 125 mA, short-circuit resistant ≤ ± 0.5 % FSO ≤ ± 0.2 % FSO max. 10 Hz > 100 x 106 0 ... 100 sec max. 1 contact for 2-wire current signal with plug ISO 4400 as...

Open the catalog to page 2

DS 201 Electronic Pressure Switch Technical Data Explosion protection (only for 4 … 20 mA / 2-wire) Approval AX14-DS 201 IBExU 06 ATEX 1050 X zone 1: II 2G Ex ia IIC T4 Gb (connector) / II 2G Ex ia IIB T4 Gb (cable) Safety tech. maximum values Ui = 28 V, Ii = 93 mA, Pi = 660 mW, C ≈ 0 nF, Li ≈ 0 µH Max. switching current 6 70 mA Permissible temperatures for en-25 ... 70 °C vironment Connecting cables cable capacitance: signal line/shield also signal line/signal line: 100 pF/m (by factory) cable inductance: signal line/shield also signal line/signal line: 1 µH/m 6 the real switching current...

Open the catalog to page 3

DS 201 Electronic Pressure Switch Technical Data Electrical connections (dimensions mm / in) different cable types and lengths available; permissible temperature depends on kind of cable; standard: 2 m PVC cable (without ventilation tube, permissible temperature: -5 ... 70 °C) Dimensions (mm / in) rotatability of display module

Open the catalog to page 4

DS 201 Electronic Pressure Switch Technical Data length of device: 97.5 mm (without plug) length of device: 87.5 mm (without plug)  metric threads and other versions on request www.bdsensors.de info@bdsensors.de © 2023 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. Mechanical connection (dimension

Open the catalog to page 5

Analogue output without 4 … 20 mA / 2-wire 0 … 10 V / 3-wire 4 … 20 mA / 3-wire, adjustable intrinsic safety 4 … 20 mA / 2-wire 1 customer Contact 1 contact 1,2 2 contacts 1,2 4 contacts 3 Accuracy 0.5 % FSO customer Electrical connection male plug M12x1 (5-pin) / plastic version male plug M12x1 (8-pin) / 3 plastic version male plug M12x1 (5-pin) / metal version male and female plug ISO 4400 2 male plug Binder series 723 (5-pin) cable outlet with PVC cable 4 customer Mechanical connection G1/2" DIN 3852 G1/2" EN 837 G1/4" DIN 3852 G1/4" EN 837 G1/2" DIN 3852 with 5 semi-flush sensor G3/4"...

Open the catalog to page 6

data sheet DS 201 6Pages

Catalog excerpts

All BD|SENSORS GmbH catalogs and technical brochures

data sheet DS 201
6Pages