DS 200P Electronic Pressure Switch Pressure Ports and Process Connections with Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure The electronic pressure switch DS 200P is the successful combination of from 0 ... 100 mbar up to 0 ... 40 bar Contacts 1, 2 or 4 independent PNP contacts, freely configurable intelligent pressure switch digital display and is suitable for the usage with viscous and pasty media. Analogue output As standard the DS 200P offers a PNP contact and a rotatable display module with 4-digit LED display. Optional versions like e. g. an intrinsically safe version, max. four contacts and an analogue output complete the profile. 2-wire: 4 ... 20 mA 3-wire: 4 … 20 mA / 0 … 10 V others on request Special characteristics ► indication of measured values on a 4-digit LED display rotable and configurable display module configurable contacts (switch on / switch off points, hysteresis / window mode, switch on / switch off delay) Preferred areas of use are Food industry Pharmacy IS-version Ex ia = intrinsically safe for gases customer specific versions BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein

DS 200P Electronic Pressure Switch Input pressure range1 Nominal pressure gauge Nominal pressure abs. Overpressure Burst pressure ≥ Vacuum resistance 1 Max. switching current Accuracy of contacts 3 Repeatability Switching frequency Switching cycles Delay time 3 consider the pressure resistance of fitting and clamps Contact 2 Standard Options Technical Data 1 PNP contact 2 independent PNP contacts 4 independent PNP contacts (possible with M12x1, 8-pin for 4 ... 20 mA/3-wire; 0 ... 10 V/3-wire on request) 4 ... 20 mA / 2- and 3-wire: contact rating 125 mA, short-circuit resistant; VSwitch = VS...

DS 200P Electronic Pressure Switch Technical Data Materials Pressure port inch thread: stainless steel 1.4404 (316 L) G1" cone, Clamp, diary pipe, Varivent®: stainless steel 1.4435 (316 L) Housing stainless steel 1.4404 (316 L) Display housing PA 6.6, Polycarbonate Seals (media wetted) standard: FKM (recommended for medium temperatures ≤ 200 °C) option: FFKM (recommended for medium temperatures < 260 °C) others on request Clamp, dairy pipe, Varivent®: without Diaphragm standard: stainless steel 1.4435 (316 L) option: Hastelloy® C-276 (2.4819); Tantalum on request Media wetted parts pressure port,...

DS 200P Electronic Pressure Switch Technical Data Electrical connections (dimensions mm / in) Dimensions (mm / in) rotatability of display module Cooling element up to 300 °C 7 (optionally) max. temperature depends on the used sealing material, type of seal and installation

DS 200P Electronic Pressure Switch Technical Data G1/2" flush with radial o-ring pN ≥ 1 bar G1" flush with radial o-ring dimensions in mm [in] size DN 40/50 A 64 [2.52] B 68 [2.68] C 84 [3.31] Clamp 3/4″ (DIN 32676) 4 bar ≤ pN ≤ 8 bar SIL- and SIL-Ex version: total length increases by 26.5 mm! metric threads and other versions on request Varivent® is a brand name of GEA Tuchenhagen GmbH, Hastelloy® is a brand name of Haynes International Inc. www.bdsensors.de [email protected] © 2024 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of...

Analogue output Contact 1 contact 2 contacts 4 contacts Accuracy standard for pN > 0,4 bar: standard for pN ≤ 0,4 bar: option for pN ≥ 0,4 bar: Electrical connection male plug M12x1 (5-pin) / plastic male plug M12x1 (8-pin) / plastic male plug M12x1 (5-pin) / metal male and female plug ISO 4400 male plug Binder series 723 (5-pin) customer Mechanical connection G1/2" with flush welded diaphragm (DIN 3852) for pn ≥ 1 bar G3/4" with flush welded diaphragm (DIN 3852) G1" with flush welded diaphragm (DIN 3852) G1" DIN 3852 with rad. o-ring and flush diaphragm G1/2" DIN 3852 with rad. o-ring and flush...