DS 200 Electronic Pressure Switch Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure The electronic pressure switch DS 200 is the successful combination of intelligent pressure switch digital display Contacts 1, 2 or 4 independent PNP contacts, freely configurable and has been specially designed for numerous applications in various industrial sectors. Analogue output As standard the DS 200 offers a PNP contact and a rotatable display module with 4-digit LED display. Optional versions like e.g. an intrinsically safe version, max. four contacts and an analogue output complete the profile. 2-wire: 4 ... 20 mA 3-wire: 4 … 20 mA / 0 … 10 V others on request Special characteristics ► indication of measured values on a 4-digit LED display rotatable and configurable display module Preferred areas of use are Plant and machine engineering Heating and air conditioning IS-version Ex ia = intrinsically safe for gases pressure sensor welded customer specific versions BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein Environmental engineering (water – sewage – recycling)

DS 200 Electronic Pressure Switch Input pressure range Nominal pressure gauge1 [bar] Nominal pressure abs. [bar] Level gauge 1 [mH2O] Overpressure [bar] Burst pressure ≥ [bar] Nominal pressure gauge 1 / absolute Level gauge 1 Overpressure Burst pressure ≥ Vacuum resistance 1 from 60 bar: measurement starts with ambient pressure Contact 2 Standard Options Max. switching current Accuracy of contacts 3 Repeatability Switching frequency Switching cycles Delay time 2 Technical Data 1 PNP contact 2 independent PNP contacts 4 independent PNP contacts (possible with M12x1, 8-pin for 4 ... 20 mA/3-wire;...

DS 200 Electronic Pressure Switch Technical Data Explosion protection (only for 4 … 20 mA / 2-wire) Approval AX14-DS 200 IBExU 06 ATEX 1050 X zone 1: II 2G Ex ia IIC T4 Gb Safety technical maximum Ui = 28 V, Ii = 93 mA, Pi = 660 mW, C ≈ 0 nF, Li ≈ 0 µH values 6 Max. switching current 70 mA Permissible temperatures for -25 ... 70 °C environment Connecting cables cable capacitance: signal line/shield also signal line/signal line: 100 pF/m (by factory) cable inductance: signal line/shield also signal line/signal line: 1 µH/m 6 the real switching current in the application depends on the power supply...

DS 200 Electronic Pressure Switch Technical Data Electrical connections (dimensions mm / in) Dimensions (mm / in) rotatability of display module * for nominal pressure pN > 400 bar increases the length of device by 19 mm (without explosion protection) or by 39 mm (with explosion protection)

DS 200 Electronic Pressure Switch Technical Data length of device: 87.5 mm (without plug) © 2024 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. Mechanical connection (dimensions mm / in) length of device: 103 mm (without plug)  metric threads and other versions on request www.bdsensors.de [email protected]

Analogue output without 4 … 20 mA / 2-wire 0 … 10 V / 3-wire 4 … 20 mA / 3-wire, adjustable intrinsic safety 4 … 20 mA / 2-wire customer Contact 1 contact 2 contacts 4 contacts Accuracy standard for pN > 0.4 bar: 0.35 % FSO standard for pN ≤ 0.4 bar: 0.50 % FSO option for pN ≥ 0.4 bar: 0.25 % FSO customer Electrical connection male plug M12x1 (5-pin) / plastic version male plug M12x1 (8-pin) / plastic version male plug M12x1 (5-pin) / metal version male and female plug ISO 4400 male plug Binder series 723 (5-pin) customer Mechanical connection G1/2" DIN 3852 G1/2" EN 837 G1/4" DIN 3852 G1/4"...