DMP 334 Industrial Pressure Transmitter for High Pressure Thinfilm Sensor accuracy according to IEC 60770: 0.35 % FSO The industrial pressure transmitter DMP 334 has been especially designed for use in hydraulic systems up to 2200 bar. The base element of DMP 334 is a thinfilm sensor, which is welded with the pressure port and meets high demands of operational safety and reliability. from 0 ... 600 bar up to 0 ... 2200 bar Analogue output 2-wire: 4 ... 20 mA 3-wire: 0 … 10 V others on request These characteristics and the excellent measurement data of DMP 334 as well as distinguished offset stability offer a pressure transmitter with easy handling, reliability, and robustness for hydraulic user. The DMP 334 is deliverable with standard HP connections. extremely robust and excellent long-term stability welded pressure sensor Plant and machine engineering IS-version Ex ia = intrinsically safe for gases and dusts adjustability of span and offset Commercial vehicles and mobile hydraulics different kinds of electrical connections BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein

DMP 334 Industrial Pressure Transmitter Input pressure range Nominal pressure gauge Overpressure Burst pressure ≥ 1 only available with pressure port G1/2“ EN 837 Output signal / Supply Standard Option IS-protection Option 3-wire Performance Accuracy 2 Permissible load Influence effects Long term stability Response time Adjustability 3 2 Technical Data ≤ ± 0.35 % FSO current 2-wire: Rmax = [(VS – VS min) / 0.02 A]  voltage 3-wire: Rmin = 10 k supply: 0.05 % FSO / 10 V load: 0.05 % FSO / k ≤ ± 0.2 % FSO / year at reference conditions < 5 msec adjustment of offset and span is possible within...

DMP 334 Industrial Pressure Transmitter Technical Data Pin configuration Electrical connection compact field housing cable colours (IEC 60757) Supply + Supply – Signal + (only for 3-wire) Shield WH (white BN (brown) GN (green) GNYE (green-yellow) Electrical connections (dimensions mm / in) compact field housing (IP 67) 4 cable outlet with PVC cable (IP 67) 4 standard: 2 m PVC cable without ventilation tube (permissible temperature: -5 ... 70 °C); others on request Mechanical connection (dimensions mm / in) According to EN 837, the pressure port and the complement at pressure over 1000 bar must...

Pressure Input only available with pressure port G1/2" EN 837 standard: 2 m PVC cable without ventilation tube (permissible temperature: -5 ... 70 °C); others on request According to EN 837, the pressure port and the complement, at pressure over 1000 bar must be preferably made of stainless steel with a tensile strength of RP > 260 N/mm² in accordance with DIN 17440. The maximum allowed pressure is 1600 bar! not possible in combination with IS-version, compact field housing and cable outlet with PVC cable © 2020 BD|SENSORS GmbH - The specifications given in this document represent the state of...