DM 01 Battery Powered Precision Digital Gauge Stainless Steel Sensor The digital pressure gauge DM 01 is a precision device fulfilling highest demands. It was conceived especially for the process monitoring and calibration. The advantage: The DM 01 consists of two devices - the digital display and a pressure transmitter. The pressure transmitter can be selected on site for different measuring ranges and connected to the display - without tools or parameter setting. Outstanding measuring qualities, an intuitive operation, as well as an innovative, modular sensor concept characterise the DM 01. The battery-powered digital pressure gauge can be used e.g. for controlling pressure courses or calibrating pressure transmitters. The integrated data logger is able to record pressure and temperature values linearly and cyclically which can be analysed with the software DAQ. Nominal pressure from 0 … 100 mbar up to 0 ... 400 bar Special characteristics ► modular sensor concept data logger graphic display stainless steel housing Ø100 mm accredited calibration certificate according to DKD / DAkkS software incl. USB converter service case with accessories zero point calibration data logger free button assignment Calibrating techniques BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein Laboratory applications Plant and machine engineering

DM 01 Precision Digital Gauge Input pressure Nominal pressure gauge Nominal pressure abs. Overpressure Burst pressure ≥ Nominal pressure gauge / abs. Overpressure Burst pressure ≥ Vacuum resistance Performance Accuracy 1 Long term stability Measuring rate / Display 1 Technical Data nominal pressure pN ≥ 0.4 bar: ≤ ± 0.05 % FSO BFSL nominal pressure pN < 0.4 bar: ≤ ± 0.125 % FSO BFSL ≤ ± 0.1 % FSO / year at reference conditions 1, 2 or 50 measurements per second accuracy according to IEC 60770 – minimum value setting (non-linearity, hysteresis, repeatability) - at room temperature 20°C Thermal...

DM 01 Precision Digital Gauge Technical Data G1/2" EN 837 (pressure transmitter and display separated) G1/2" DIN 3852 with flush sensor 4 G1/2" DIN 3852 open pressure port 4  metrical threads and other variations on request 4 only possible for nominal pressure ranges pN ≤ 40 bar

DM 01 Precision Digital Gauge Further Pressure Sensor Modules Technical Data Further pressure sensor modules can be combined to the advertisement unity DM01-A21 and DM01-A2E. an overview of available pressure sensor modules and characteristics you will find in the following matrix: Pressure sensor module Name Pressure range Filling fluid diaphragm accuracy Special feature further information M0 0...0.1 bar silicone oil stainless steel 0.05% FSO very see data sheet up to 1.4435 high 0...400 bar precision M4 0...6 bar none; stainless steel 0.25% FSO i.a. on request up to welded version 1.4542 for...

DM 01 Accessories Technical Data Precision Digital Gauge Hard-shell service case without accessories Hard shell case. Rubber protection Ordering number: Z1002648 Additional batteries for IS-version use only 3 x 1.5 V / AA Duracell Power Plus (only in combination with service case) Seal set Flat seal copper for mechanical connections according to EN 837 (only in combination with service case) PTFE seal tape Nr. 498.505 Seal tape for mechanical connections material: temperature range: (only in combination with service case) Wrench SW 27 (only in combination with service case) Calibration test pump...

Ordering code DM 01 1. Position: Digital Display for Precision Digital Pressure Gauge DM 01 DM 01Digital Pressure Gauge DM 01 with communication interface IS (zone 1) with communication interface IS (zone 0) with communication interface 2. Position: Transmitter for Precision Digital Pressure Gauge DM 01 Version standard version (without explosion protection) Accuracy standard for pN ≥ 0.4 bar standard for pN < 0.4 bar IS-version [BFSL] 0.05 % FSO 0.125 % FSO customer Mechanical connection Special version FKM customer standard customer Accessories USB converter (incl. software DAQ on USB stick)...