Catalogs >
BD|SENSORS GmbH >
data sheet DL 01

data sheet DL 01
6Pages

Catalog excerpts

DL 01 Battery Powered Precision Digital Gauge for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure The digital pressure gauge DL 01 is a precision device fulfilling highest demands. It was conceived especially for leak testing or pipeline monitoring. from 0 … 100 mbar up to 0 ... 400 bar Special characteristics ► ► data logger graphic display stainless steel housing Ø100 mm In the leakage mode the device shows the pressure decrease during an adjustable time. After finishing of measurement, the result is shown in the display. modular sensor concept Outstanding measuring qualities, an intuitive operation, as well as an integrated data logger characterize the DL 01. In addition, the graphic display provides the handling and the clear presentation of the measuring procedure. accredited calibration certificate according to DKD / DAkkS software incl. USB converter service case with various accessories The gathered data and the relevant information (TAG or serial number, etc.) are recorded and can be read out and processed over the integrated interface via USB and PC software. Preferred areas of use are data logger interval 1 s … 99 days or fixed time default values for time / test duration zero point calibration Plant and machine engineering backlight and much more BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein Pipeline monitoring Leak testing

Open the catalog to page 1

DL 01 Precision Digital Gauge for Leak Testing Input pressure Nominal pressure gauge Nominal pressure abs. Overpressure Burst pressure ≥ Nominal pressure gauge / abs. Overpressure Burst pressure ≥ Vacuum resistance Performance Accuracy 1 Long term stability Measuring rate / Display 1 Technical Data nominal pressure pN ≥ 0.4 bar: ≤ ± 0.05 % FSO BFSL nominal pressure pN < 0.4 bar: ≤ ± 0.125 % FSO BFSL ≤ ± 0.1 % FSO / year at reference conditions 1 or 2 measurements per second accuracy according to IEC 60770 – minimum value setting (non-linearity, hysteresis, repeatability) – at room...

Open the catalog to page 2

DL 01 Precision Digital Gauge for Leak Testing Technical Data G1/2" EN 837 (pressure transmitter and display separated) G1/2" DIN 3852 with flush sensor 4 G1/2" DIN 3852 open pressure port 4  metrical threads and other variations on request only possible for nominal pressure ranges pN ≤ 40 bar

Open the catalog to page 3

DL 01 Precision Digital Gauge for Leak Testing Accessories are not in scope of supply and have to be ordered separately. BD|LOG Software (lite Version) Optionally the software BD|LOG and an interface cable can be ordered. The software is also available for download on our homepage Software (Communication, Configuration): • display of device information (serial number, pressure and temperature range, …) configuration area for all parameters download area for recorded data: - date - pressure value - temperature value actual value Interface cable with integrated USB converter (l: 1.7 m) BD|LOG...

Open the catalog to page 4

DL 01 Accessories Technical Data Precision Digital Gauge for Leak Testing Hard-shell service case without accessories Hard shell case. dimension in mm (L x W x H): 432 X 363 X 138 Rubber protection Ordering number: Z1002648 Additional batteries for IS-version use only 3 x 1.5 V / AA Duracell Power Plus (only in combination with service case) Seal set Flat seal copper for mechanical connections according to EN 837 (only in combination with service case) PTFE seal tape Nr. 498.505 Seal tape for mechanical connections material: temperature range: (only in combination with service case) Wrench...

Open the catalog to page 5

Ordering code DL 01 1. Position: Digital Display for Precision Digital Pressure Gauge DL 01 DL 01Digital pressure gauge DL 01 with communication interface IS (zone 1) with communication interface IS (zone 0) with communication interface 2. Position: Transmitter for Precision Digital Pressure Gauge DL 01 Version standard version (without explosion protection) IS-version [BFSL] 0.05 % FSO 0.125 % FSO customer Accuracy standard for pN ≥ 0.4 bar standard for pN < 0.4 bar Mechanical connection Special version standard customer Accessories USB converter (incl. software BD|LOG) service case...

Open the catalog to page 6

data sheet DL 01 6Pages

Catalog excerpts

All BD|SENSORS GmbH catalogs and technical brochures

data sheet DL 01
6Pages