DCT 563 Industrial Pressure Transmitter with IO-Link Interface Ceramic Sensor accuracy according to IEC 60770: 0.5 % FSO IO-Link is a digital interface for sensors and actuators, which is worldwide standardized by IEC 61131-9. IO-Link does not have a bus topology, but it is a powerful point to - point communication, where the device can be parameterized and the measured values transferred. The integration to the master is easy by using the IODD-file. from 0 ... 600 mbar up to 0 ... 600 bar Digital output signal - IO-Link according to specification V 1.1 data transfer 38.4 kbit/s smart sensor profile The sensor technology of the DCT 563 is the same as those of the proven pressure transmitter DMK 331, whereby the DCT 563 is suitable for pasty, polluted and aggressive media as well as for low-pressure oxygen applications. good thermal behaviour good long term stability The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 563 to different conditions on-site. pressure port G 1/2" flush for pasty media (up to 25 bar) pressure port G 1/2" open port PVDF for aggressive media (up to 60 bar) Plant and machine engineering Environmental engineering (water - sewage - recycling) oxygen application Medical technology BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein www.bdsensors.de info@bd

DCT 563 Industrial Pressure Transmitter with IO-Link Interface Input pressure range 1 Nominal pressure gauge Nominal pressure abs. Overpressure Burst pressure ≥ Nominal pressure gauge / abs. Overpressure Burst pressure ≥ Vacuum resistance 1 2 PVDF pressure port possible for nominal pressure ranges up to 60 bar accuracy ≤ 1 % FSO Output signal / Supply Standard IO-Link Data transfer Mode Standard Performance Accuracy 3 Switching current (SIO-Mode) Switching frequency Switching cycles Long term stability Turn-on time Response time Measuring rate 3 Technical Data IO-Link (measured value / status...

DCT 563 Industrial Pressure Transmitter with IO-Link Interface Technical Data Pin configuration Electrical connection (L+) (L-) (C/Q) © 2022 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. Wiring diagram Supply + Supply – SIO / IO Link (COMx) Shield G1/2" DIN 3852 with flush sensor 6  metric threads and other versions on request possible for nominal pressure ranges pN ≤ 25 bar; absolute pressure ranges on request DCT563_E_210222 www.bdsensors.de...

Output IO-Link (COMx) / SIO Accuracy 0.5 % FSO customer Electrical connection male plug M12x1 (4-pin) / metal customer Mechanical connection G1/2" DIN 3852 G1/2" EN 837 G1/4" DIN 3852 G1/4" EN 837 G1/2" DIN 3852 with semi-flush sensor G1/2" DIN 3852 open pressure port 1/2" NPT 1/4" NPT customer Seals FKM EPDM customer Pressure port stainless steel 1.4404 (316L) PVDF customer Diaphragm ceramics Al2O3 96% customer Special version standard oxygen application customer metric threads and others on request possible for nominal pressure ranges pN ≤ 25 bar; absolute pressure ranges on request possible...