DCT 533 Industrial Pressure Transmitter with IO-Link Interface Stainless Steel Sensor accuracy according to IEC 60770: standard: ≤ ± 0.35 % FSO option: ≤ ± 0.25 % FSO from 0 ... 100 mbar up to 0 ... 400 b Digital output signal - IO-Link according to specification V 1.1 data transfer 38.4 kbit/sec smart sensor profile The sensor technology of the DCT 533 is the same as those of the proven pressure transmitter DMP 331 / DMP 333, whereby the DCT 533 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. perfect thermal behaviour excellent long term stability welded sensor The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 533 to different conditions on-site. pressure port G 1/2" flush up to 40 bar IO-Link is a digital interface for sensors and actuators, which is worldwide standardized by IEC 61131-9. IO-Link does not have a bus topology, but it is a powerful point-to-point communication, where the device can be parametrized, and the measured values transferred. The integration to the master is easy by using the IODD-file. customer specific versions Preferred areas of use are Plant and machine engineering Energy industry BD SENSORS GmbH BD-Sensors-Straße 1 D - 95199 Thierstein

Industrial Pressure Transmitter with IO-Link Interface Input pressure range Nominal pressure gauge Nominal pressure absolute Overpressure Burst pressure ≥ Nominal pressure gauge / abs. Overpressure Burst pressure ≥ Vacuum resistance Output signal / Supply Standard IO-Link Data transfer Mode Standard Performance Accuracy 1 Switching current (SIO-Mode) Switching frequency Switching cycles Long term stability Turn-on time Response time Measuring rate 1 for pN ≥ 0.4 bar: ≤ ± 0.35 % FSO for pN < 0.4 bar: ≤ ± 0.50 % FSO option for pN ≥ 0.4 bar: ≤ ± 0.25 % FSO max. 200 mA max. 200 Hz > 100 x 106 ≤ ±...

Industrial Pressure Transmitter with IO-Link Interface Pin configuration Electrical connection Supply + Supply – SIO / IO Link Shield G1/2" DIN 3852 with flush sensor, pN ≤ 40 bar  metric threads and other versions on request www.bdsensors.de [email protected] © 2023 BD|SENSORS GmbH – The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.

Output IO-Link / SIO Accuracy standard for p N ≥ 0.4 bar standard for p N< 0.4 bar option for pN ≥ 0.4 bar Electrical connection male plug M12x1 (4-pin) / metal customer Mechanical connection G1/2" DIN 3852 G1/2" EN 837 G1/4" DIN 3852 G1/4" EN 837 G1/2" DIN 3852 with flush sensor G1/2" DIN 3852 open pressure port 1/2" NPT 1/4" NPT customer Seal FKM EPDM without (welded version) customer Special version standard customer 1 2 3 absolute pressure possible from 0.4 bar not possible for nominal pressure pN > 40 bar welded version only with pressure ports according to EN 837 and NPT, possible for pN...