Safety data sheet Page: 1/12 BASF 3D Printing Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time. Date / Revised: 11.02.2020 Version: 3.0 Date previous version: 11.02.2020 Previous version: 2.0 Product: BCN3D BVOH polyvinyl alcohol filament (ID no. 30778100/SDS_GEN_EU/EN) Date of print 11.12.2020 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier BCN3D BVOH polyvinyl alcohol filament 1.2. Relevant identified uses of the substance or mixture and uses advised against Recommended use: 3D Printing, for industrial use only 1.3. Details of the supplier of the safety data sheet Company: BASF 3D Printing Solutions B.V. Eerste Bokslootweg 17 7821 AT Emmen, Netherlands Contact address: BASF SE 67056 Ludwigshafen GERMANY ___________________________________________________________________________ Telephone: +49 621 60-0 E-mail address: [email protected] 1.4. Emergency telephone number International emergency number: Telephone: +49 180 2273-112 SECTION 2: Hazards Identification 2.1. Classification of the substance or mixture For the classification of the mixture the following methods have been applied: extrapolation on the concentration levels of the hazardous substances, on basis of test results and after evaluation of experts. The methodologies used are mentioned at the respective test results.

Page: 2/12 BASF 3D Printing Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time. Date / Revised: 11.02.2020 Version: 3.0 Date previous version: 11.02.2020 Previous version: 2.0 Product: BCN3D BVOH polyvinyl alcohol filament (ID no. 30778100/SDS_GEN_EU/EN) Date of print 11.12.2020 According to Regulation (EC) No 1272/2008 [CLP] No need for classification according to GHS criteria for this product. 2.2. Label elements Globally Harmonized System, EU (GHS) The product does not require a hazard warning label in accordance with GHS criteria. 2.3. Other hazards...

Page: 3/12 BASF 3D Printing Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time. Date / Revised: 11.02.2020 Version: 3.0 Date previous version: 11.02.2020 Previous version: 2.0 Product: BCN3D BVOH polyvinyl alcohol filament (ID no. 30778100/SDS_GEN_EU/EN) Date of print 11.12.2020 Wash thoroughly with soap and water Burns caused by molten material require hospital treatment. If irritation develops, seek medical attention. On contact with eyes: In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. If irritation develops,...

Page: 4/12 BASF 3D Printing Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time. Date / Revised: 11.02.2020 Version: 3.0 Date previous version: 11.02.2020 Previous version: 2.0 Product: BCN3D BVOH polyvinyl alcohol filament (ID no. 30778100/SDS_GEN_EU/EN) Date of print 11.12.2020 SECTION 6: Accidental Release Measures High risk of slipping due to leakage/spillage of product. 6.1. Personal precautions, protective equipment and emergency procedures No special precautions necessary. 6.2. Environmental precautions Discharge into the environment must be avoided....

Page: 5/12 BASF 3D Printing Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time. Date / Revised: 11.02.2020 Version: 3.0 Date previous version: 11.02.2020 Previous version: 2.0 Product: BCN3D BVOH polyvinyl alcohol filament (ID no. 30778100/SDS_GEN_EU/EN) Date of print 11.12.2020 8.2. Exposure controls Personal protective equipment Respiratory protection: Wear respiratory protection if ventilation is inadequate. Suitable respiratory protection for higher concentrations or long-term effect: (Particle filter EN 143 P1) Hand protection: Chemical resistant protective...

BASF 3D Printing Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time. Date / Revised: 11.02.2020 Version: 3.0 Date previous version: 11.02.2020 Previous version: 2.0 Product: BCN3D BVOH polyvinyl alcohol filament Vapour pressure: Relative density: Study does not need to be conducted. Relative vapour density (air): The product is a non-volatile solid. Solubility in water: completely soluble Solubility (qualitative) solvent(s): N, N-dimethylformamide, Methane, sulfinylbis- Partitioning coefficient n-octanol/water (log Kow): not applicable for mixtures Self...

Page: 7/12 BASF 3D Printing Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time. Date / Revised: 11.02.2020 Version: 3.0 Date previous version: 11.02.2020 Previous version: 2.0 Product: BCN3D BVOH polyvinyl alcohol filament (ID no. 30778100/SDS_GEN_EU/EN) Date of print 11.12.2020 Substances to avoid: oxidizing agents 10.6. Hazardous decomposition products Thermal decomposition products: Prolonged thermal loading can result in products of degradation being given off. SECTION 11: Toxicological Information 11.1. Information on toxicological effects Acute toxicity...

Page: 8/12 BASF 3D Printing Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time. Date / Revised: 11.02.2020 Version: 3.0 Date previous version: 11.02.2020 Previous version: 2.0 Product: BCN3D BVOH polyvinyl alcohol filament (ID no. 30778100/SDS_GEN_EU/EN) Date of print 11.12.2020 No applicable information available. Developmental toxicity Assessment of teratogenicity: No applicable information available. Specific target organ toxicity (single exposure) No data available. Repeated dose toxicity and Specific target organ toxicity (repeated exposure) Assessment...

BASF 3D Printing Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time. Date / Revised: 11.02.2020 Version: 3.0 Date previous version: 11.02.2020 Previous version: 2.0 Product: BCN3D BVOH polyvinyl alcohol filament The product does not contain a substance fulfilling the PBT (persistent/bioaccumulative/toxic) criteria or the vPvB (very persistent/very bioaccumulative) criteria. The product does not contain substances that are listed in Annex I of Regulation (EC) 2037/2000 on substances that deplete the ozone layer. Adsorbable organically-bound halogen (AOX):...