Model TFS2100 Thermal Gas Flow Transmitters for Gas Flow Rate Measurement Description The model TFS2100 thermal gas flow transmitter is developed for air and gas flow rate measurements where compact size and light weight are required. This transmitter is built with a thermal mass flow sensor which is made through MEMS process. Thanks to the MEMS process, the TFS2100 has wide measuring range with high accuracy. As there is no moving part in the sensor, the TFS2100 is a solid state transmitter with excellent reliability. In case of high-volume orders, the transmitter housing can be customized for the best integration of the sensor into the gas meter housing. industrial flow control medical flow measurements excellent reliability portable gas flow measuring devices compact and light weight design BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: [email protected]

Model TFS2100 Thermal Gas Flow Transmitters for Gas Flow Rate Measurement Technical Data Parameters flow medium natural gas, air, nitrogen, oxygen measuring range ultimate flow rate ultimate pressure of flow medium output signal supply voltage 10 (typical), or any voltage in range of 7, ..., 14Vdc supply current 25 (typical), or any voltage in range of 15, ..., 30mA long-term stability storage temperature range operating temperature range output impedance compensated temperature range temp. coeff. (TC) of span pressure drop response time power consumption in continuous mode power consumption...

Thermal Gas Flow Transmitters for Gas Flow Rate Measurement Ordering Information for other media, consult BCM 3P: 3-pin plug-in connector (standard) FW: 200mm flying wires "(*)" is necessary only if any customized parameter is required, otherwise it is neglectable. Examples of Ordering Code • standard sensor: BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 Tel.: +32-3-238 6469 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM Fax: +32-3-238 4171 email: [email protected]