Catalogs >
BCM SENSOR TECHNOLOGIES bv >
Model L V66(a)/L V66(b)

Model L V66(a)/L V66(b)
1 / 4Pages

Catalog excerpts

Model LV66(a)/LV66(b) Oil Level Transmitters Description Based on capacitive principle, the LV66-series oil level transmitters are developed for automotive application where the oil level in fuel tank has to be measured or controlled. The LV66-series transmitters can also be used to measure or control the level of any non-conductive liquid in tank application. Thanks to the capacitive working principle, the LV66-series transmitter features lower temperature drift and wider oil temperature range from -50°C to +200 °C, compared to other sensor technology. In addition, there are no moving parts in the LV66-series level transmitters, so the transmitters are solid state sensors and offer excellent stability and reliability for oil level application. The detection part of LV66-series transmitters can be made from either aluminum or 316 stainless steel materials. The 316 stainless steel version allows the LV66-series not only to be installed in harsh environment but also to be able to measure various non-conductive liquid compatible with 316L stainless steel. There are two versions available for LV66-series level transmitters, LV66(a) and LV66(b). The LV66(a) is installed in oil tank by means of thread mounting while the LV66(b) is fixed to oil tank through flange mounting. Each transmitter is calibrated at factory with the oil (or equivalent) specified by customers so as to provide required accuracy. Features medium to measure: oil, fuel, or any non-conductive liquids automotive industry chemical industry industrial application wide medium temperature range: -50 ~ +200°C selectable output: 4~20mA (standard), 0~5Vdc, 0~10Vdc, CAN open, SPI solid state sensor, no moving parts for high reliability BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.com

Open the catalog to page 1

Model LV66(a)/LV66(b) Oil Level Transmitters Technical Data Parameters oil, fuels, or other non-conductive liquid measuring liquid medium level ranges output signal long-term stability load resistance for current loop storage temperature range compensated temperature range temperature coefficient of zero temperature coefficient of span electrical interface Φ7.3mm, shielded black PVC cable wetted parts material flange material electronics housing material environment protection net weight IP68 for the stem part, IP66 for the electronic housing gram from around 300 (depends on level range)...

Open the catalog to page 2

Model LV66(a)/LV66(b) Oil Level Transmitters Dimensions LV66(b) with flange mounting LV66(a) with threads mounting electronic housing top of oil or fuel tank electronic housing H (height of the stem depends on measuring level range) H (height of the stem depends on measuring level range) BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsenso

Open the catalog to page 3

Model LV66(a)/LV66(b) Oil Level Transmitters Ordering Information position (pos.) 1: model LV66(a) LV66(b) pos. 2: measuring level ranges 5/700mm 5/300mm 5/50mm 5/1000mm 5/400mm 5/100mm 5/500mm 5/200mm pos. 3: measuring liquid medium oil (standard) other medium (please specify) pos. 4: output signal 4/20mA (standard) pos. 5: accuracy 0.5%fs 1%fs 2%fs 3%fs 4%fs 5%fs (according to level range) pos. 6: compensated temperature range T1 = -50 ~ +80°C (standard) T2 = -50 ~ +150 pos. 7: wetted parts material Al = aluminum (standard) 316LSS = 316L stainless steel pos. 8: mechanical interface for...

Open the catalog to page 4

Model L V66(a)/L V66(b) 1 / 4Pages

Catalog excerpts

All BCM SENSOR TECHNOLOGIES bv catalogs and technical brochures

Model L V66(a)/L V66(b)
1 / 4Pages