Model 2965 Paddle Force Transducers Features - paddle force - made from aluminum with rubber plates - range from 500 N to 1500 N - accuracy up to 0.5 %fs - environment protection up to IP 67 Applications - paddle force measuring system - compression force measurement Description Based on BCM advanced strain gauge technology, model 2965 paddle force transducers are developed for application of compressive paddle force measurement in automotive industry. The transducer is made from aluminum alloy and integrated with two rubber plates. The special design in shape and dimensions allows the 2965 transducer to be easily installed in a paddle force measuring system. The 2965 paddle force transducers possess 0.1%fs (fs = full scale) measuring accuracy for paddle force ranging from 500 to 1500 N. Thanks to BCM’s leading technology in sealing process, the 2965 paddle force transducers can be made to IP 67 protection grade, and are suitable for applications in harsh industrial conditions. Electrical Connection rubber plate signal-, (white) excitation-, (black) signal+, (green) shielding screen BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: [email protected]

Model 2965 Paddle Force Transducers Technical Data parameters safe load limit ultimate overload zero unbalance excitation (supply voltage) input resistance output resistance insulation resistance storage temp. range operating temp. range compensated temp. range temp. coefficient of sensitivity temp. coefficient of zero load cell body material mild steel mechanical interface refer to the dimensions on the datasheets electrical interface Φ5.7mm, 4-conductor shielded cable, PVC jacket, 5 m environment protection unit weight to be confirmed when order The listed specifications are subject to change...

Model 2965 Paddle Force Transducers Ordering Information position (pos.) 1: model 2965: made from aluminum alloy pos. 4: non-linearity or accuracy class 0.05 %fs 0.1 %fs (standard) pos. 5: bridge resistance 500 Ω (Rin = 520 ± 10 Ω, Rout = 500±10 Ω) pos. 6: mechanical interface Refer to the dimensions on the datasheets. Pos. 6 can be omitted from the ordering code. pos. 7: electrical interface cable, code = diameter(Φ)/number of conductors/cable jacket/cable length 5.7/4/PVC/5 = Φ5.7 mm, 4-conductors shielded, PVC, length = 5*m pos. 8: environment protection IP 66 (standard) IP 67 pos. 9: accessories...