Model 1815
1 / 2Pages

Catalog excerpts

Model 1815 Non-Contact Rotary Torque Transducers Description The model 1815 Rotary Torque Transducer is designed for low torque measurements. This model features no electric brush between its rotor and stator by applying the electromagnetic induction principle. The noncontact nature of the signal transfer can elimilate the need of mantainence, which makes the transducers capable of operating under high speed for a long time. Morover, this transducer is also widely used to measure viscous forces. The measuring torque capacity spans from 0.005Nm to 2Nm with accuracy of 0.5%fs. Its output signal is frequency signal 10±5kHz (square wave, ±6V). The transducer can be coupled with a speed sensor on request, and its tachometric wheel measurs the rotational speed up to 60 pulses per round. Features - 0.005Nm, ..., 2Nm capacity - maximum rotation speed of 4000rpm - 0.5%fs measuring accuracy - speed measurement available on request BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.c

Open the catalog to page 1

Model 1815 Non-Contact Rotary Torque Transducers Technical Data capacity safe load limit ultimate overload output signal frequency signal of square wave of ±6V frequency @ zero load maximum rotation speed speed measurement* (option) power supply load current response time storage temp. range operating temp. range compensated temp. range temp. coefficient of span temp. coefficient of zero material environment protection aluminum alloy mechanical interface refer to the dimensions drawing electrical interface 5-pin connector with detachable mating socket and 3 m PVC cable unit weight The...

Open the catalog to page 2

Model 1815 1 / 2Pages

Catalog excerpts

All BCM SENSOR TECHNOLOGIES bv catalogs and technical brochures

Model 1815
1 / 2Pages