Model 1664 Single Point Load Cells Features - parallel bending beam - capacity: 50kg, …, 500kg - accuracy: 0.02%fs; option: OIML C3 - recommended platform size: 400mm x 400mm - aluminum construction with surface anodized - environment protection class: IP65 Applications - retail scales - bench scales - counting scales Description The "single point" load cells are made of parallel bending beam working principle. Only one unit is sufficient to build up a scale. These load cells are moment insensitive. That is, when installed in a platform scale, it reads the same regardless of the position of the load applied to the upper platform. Model 1664 load cells are designed to this "single point" type and are manufactured from high quality aluminum alloy of aviation standard. 1664 load cells can be used to measure loads ranging from 50kg to 500kg with the measuring accuracy of 0.02%fs (fs = full scale). On request, 1664 load cells can be supplied with OIML C3 certificate. 1664 load cells are widely used to manufacture retail, bench, and counting scales. Electrical Connection signal-, (white) excitation-, (black) signal+, (green) shielding screen BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: [email protected]

Model 1664 Single Point Load Cells Technical Data Specifications Parameters capacity safe load limit ultimate overload zero unbalance accuracy class according to OIML R60 max. number of verification interval (nmax) min. load cell verification interval (Vmin) combined error excitation (supply voltage) input resistance output resistance insulation resistance storage temp. range operating temp. range compensated temp. range temp. coefficient of sensitivity temp. coefficient of zero load cell body material aluminum alloy mechanical interface refer to the dimensions on the datasheets electrical interface...

Model 1664 Single Point Load Cells Ordering Information position (pos.) 1: model 1664 pos. 2: capacities 50kg 70kg 100kg 200kg 300kg 500kg pos. 3: output sensitivity 2mV/V pos. 4: non-linearity or accuracy class 0.02%fs (standard) pos. 5: bridge resistance 350Ω (Rin = 410±10Ω, Rout = 350±10 Ω) pos. 6: threads (live end/fixed end) 4xM6/4xM6 : four M6 threads at the live end, four M6 threads at the fixed end pos. 7: electrical interface 5/4/PVC/2 = Φ5 mm, 4-conductors shielded, PVC, length = 2* m pos. 8: environment protection IP65 pos. 9: accessories for installation NA**. In case of “NA”, pos.9...