Model 1660 Single Point Load Cells Features - parallel bending beam - low profile - capacity: 0.5kg, …, 25kg - accuracy: 0.02%fs - recommended platform size: 200 x 200 mm - aluminum construction with surface anodized - environment protection class: IP65 Applications - retail scales - bench scales - counting scales Description The single point load cells are made of parallel bending beam working principle. Only one unit is sufficient to build up a scale. These load cells are moment insensitive. That is, when installed in a platform scale, it reads the same regardless of the position of the load applied to the upper platform. Model 1660 load cells are designed to this single point type and are manufactured from high quality aluminum alloy of aviation standard. 1660 load cells can be used to measure loads ranging from 0.5kg to 25kg with the measuring accuracy of 0.02%fs (fs = full scale). 1660 load cells are widely used to manufacture retail, bench, and counting scales. Electrical connection signal-, (white) excitation-, (black) signal+, (green) shielding screen BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: [email protected]

Model 1660 Single Point Load Cells Technical Data parameters safety overload ultimate overload zero unbalance excitation (supply voltage) input resistance output resistance insulation resistance storage temp. range operating temp. range compensated temp. range temp. coefficient of zero temp. coefficient of sensitivity load cell body material aluminum alloy mechanical interface refer to the dimensions on the datasheets electrical interface environment protection unit weight The listed specifications are subject to change without prior notice. BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4,...

Model 1660 Single Point Load Cells Ordering Information parameter (par.) 1: model 1660: made from aluminum alloy par. 4: non-linearity or accuracy class 0.02%fs par. 5: bridge resistance 350Ω (Rin = 405±10Ω, Rout = 350±3Ω) par. 6: threads (live end/fixed end) 2xM3/2xM3 : two M3 threads at the live end, two M3 threads at the fixed end par. 7: electrical interface cable, code = diameter(Φ)/number of conductors/cable jacket/cable length 4/4/PVC/0.3 = Φ4mm, 4-core shielded, PVC, length = 0.3* m par. 9: accessories for installation NA**. In case of “NA”, pos.9 can be omitted. par. 10: customized spec’s...