Model 101B(f)
1 / 6Pages

Catalog excerpts

Model 101B(f) Flange-Mounting Pressure Sensors Description The 101B(f) pressure sensor consists of a customized flange and the BCM standard OEM pressure sensor 101B(a19L) or 101B(a19G). To choose whether the 101B(a19L) or 101B(a19G) depends on required ranges or constraint of size. The chosen standard sensor is fixed into the customized flange fitting made from either 316L or 17-4PH stainless steel via surface welding technique. When the sensor is mounted or installed, it is sealed through a so-called surface-to-surface seal between a part of its front surface and the interface of the equipment to which it is installed or mounted. Therefore the high surface quality is required to guarantee the surface-to-surface seal often used in semiconductor industry. An O-ring can be installed in between the front surface of the sensor and the equipment, to provide a low-cost solution for seal. The sensor performance of the 101B(f) can be referred to the specifications of 101B(a19L) and 101B(a19G). In the datasheets the most common flange fittings are depicted in the drawings of sensor 101B(f). measuring ranges: -1bar, 0.2bar, ..., 25bar accuracy up to 0.25%fs either with or without temperature compensation compensated temperature range: 0~70 °C outstanding reliability excited by either current or voltage Applications process control systems liquid level control pneumatic and hydraulic systems biomedical instruments heating, ventilation, and air conditioning controls petroleum and chemical industry ship and marine systems aviation Environmental Conditions position effect: < 0.1% of zero offset shift in any direction vibration effect: no change at 10 g (RMS), 20~2000 Hz shock: 100 g, for 10 millisecond BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.com

Open the catalog to page 1

Model 101B(f) Flange-Mounting Pressure Sensors Technical Data - Model 101B(f) Based on Model 101B(a19G) Parameter gases or dilute fluids pressure medium sealed gauge pressure types overload pressure full scale output (fso) zero offset long-term stability bridge resistance insulation resistance compensated temperature range operating temperature range storage temperature range temperature coefficient of zero offset temperature coefficient of span life time response time O-ring (fluorine rubber) process sealing 4 colored flying wires, PVC, 100mm (standard) 5 gold-plated copper pins, Ф0.45mm,...

Open the catalog to page 2

Model 101B(f) Flange-Mounting Pressure Sensors Technical Data - Model 101B(f) Based on Model 101B(a19L) Parameter gases or dilute fluids gauge (standard) absolute/sealed gauge overload pressure full scale output (fso) pressure medium pressure ranges zero offset long-term stability bridge resistance insulation resistance compensated temperature range operating temperature range storage temperature range temperature coefficient of zero offset temperature coefficient of span life time response time process sealing face to face seal, O-ring (fluorine rubber) 4 colored flying wires, PVC, 100mm...

Open the catalog to page 3

Model 101B(f) Flange-Mounting Pressure Sensors Circuit Diagram closed-bridge circuit diagram for compensated sensors with 4 wires or 6 pins (standard) open-bridge circuit diagram for uncompensated sensors with 5 pins Electronic Interface 4 colored flying wires or 6 copper pins signal + connection excitation + no function signal + no function signal excitation - wire color red no wire orange no wire yellow brown 5 wires or 6 gold-plated copper pins connection excitation + signal signal + no function excitation excitation - wire color red yellow orange no wire black brown BCM SENSOR...

Open the catalog to page 4

Model 101B(f) Flange-Mounting Pressure Sensors Ordering Information - Model 101B(f) Based on Model 101B(a19G) ordering code: 101B(f)-101B(a19G)-35-G-II-T1-4F-v-(*) submodel 101B(a19G) customized range available as an option pressure types G = gauge pressure (standard) A = absolute pressure S = sealed gauge pressure accuracy II = 0.25%FS (standard) III = 0.5%FS compensation T1 = 0 ~ 70 °C (standard) NT = no temperature compensation electrical interface 4F = 4 colored flying wires, PVC, 100mm (standard) 5P = 5 gold-plated copper pins, Ф0.45mm, 13mm 6P = 6 gold-plated copper pins, Ф0.45mm,...

Open the catalog to page 5

Model 101B(f) Flange-Mounting Pressure Sensors Ordering Information - Model 101B(f) Based on Model 101B(a19L) ordering code: 101B(f)-101B(a19L)-10-G-II-T1-4F-v-(*) submodel 101B(a19L) ranges 6 = 0~6 bar G, A 10 = 0~10 bar G, A 16 = 0~16 bar G, A 25 = 0~25 bar G, A customized range available as an option pressure types G = gauge pressure (standard) A = absolute pressure accuracy II = 0.25%FS (standard) III = 0.5%FS compensation T1 = 0~70 °C (standard) NT = no temperature compensation electrical interface 4F = 4 colored flying wires, PVC, 100mm (standard) 5F = 5 colored flying wires, PVC,...

Open the catalog to page 6

Model 101B(f) 1 / 6Pages

Catalog excerpts

All BCM SENSOR TECHNOLOGIES bv catalogs and technical brochures

Model 101B(f)
1 / 6Pages