Catalogs >
BCM SENSOR TECHNOLOGIES bv >
Model 101B(a13H)

Model 101B(a13H)
4Pages

Catalog excerpts

Model 101B(a13H) Compact Pressure Sensors Description The 101B(a13H) is a compact pressure sensor for general purpose. The 101B(a13H) is designed for pressure measurements involving hostile media compatible with 316L stainless steel or Hastelloy C. The sensor is based on BCM’s piezoresistive sensor die housed in a stainless steel body where oil is filled. The filling oil is isolated from measured media by a stainless steel diaphragm. Compared with the 101B(a19G), the 101B(a13H) has not only smaller dimensions but higher rated pressure up to 1000bar. Its pressure reference has two selections, sealed gauge and absolute pressure. The method by which the 101B(a13H) can be fixed and sealed is either face welding or O-ring fitting. measuring ranges: 10bar, ..., 600bar pressure references: gauge, absolute, and sealed gauge pressure accuracy up to 0.25%fs either with or without temperature compensation compensated temperature range: -10 ~ +70 °C outstanding reliability excited by either current or voltage Applications process control systems industrial controls hydraulic controls liquid level control pressure transducers and transmitters pressure calibrators position effect: < 0.1% of zero offset shift in any direction vibration effect: no change at 10 g (RMS), 20~2000 Hz shock: 100 g, for 10 millisecond 100 collar O-ring Ø12.4 Ø12.6 Notes: 1. All dimensions are in mm. 2. The sensor will be equipped with the collar if the range ≥ 400bar. BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsenso

Open the catalog to page 1

Model 101B(a13H) Compact Pressure Sensors Technical Data Parameters compatible with wetted parts material pressure medium pressure references proof pressure burst pressure sealed gauge full scale output (fso) excitation zero offset long-term stability input resistance output resistance insulation resistance compensated temperature range operating temperature range storage temperature range temperature coefficient of zero offset temperature coefficient of span ≤ ±0.03, in case of voltage excitation: -0.23 ~ -0.18 life time response time O-ring (fluorine rubber) process sealing 4 colored...

Open the catalog to page 2

Model 101B(a13H) Compact Pressure Sensors Circuit Diagram excitation+ excitationclosed-bridge circuit diagram for 4-wire electrical interface (standard) open-bridge circuit diagram for 5-pin electrical interface Electronic Interface 4 colored flying wires 5 gold-plated copper pins vent hole for gauge pressure wire color red black yellow blue connection excitation + excitation signal + signal - connection signal excitation excitation signal + excitation + Notes: 1. All dimensions are in mm. 2. In case of alterations, refer to the label on the package. BCM SENSOR TECHNOLOGIES BVBA...

Open the catalog to page 3

Model 101B(a13H) Compact Pressure Sensors Ordering Information position (pos.) 1: model 101B(a13H) pos. 2: pressure ranges and references 250bar S 10bar G, A 400bar S 25bar G, A 600bar S 40bar G, A, S 1000bar S 60bar S 100bar S pos. 3: output signal 60mV pos. 4: accuracy 0.25%fs (standard) G: gauge pressure A: absolute pressure S: sealed gauge pos. 5: compensation NT = no temperature compensation (standard) T1 = -10 ~ +70 °C pos. 6: electrical interface 4F = 4 colored flying silicone rubber wires, 100mm (standard) 5P = 5 gold-plated copper pins, Ф0.45mm, 13mm If the required output signal...

Open the catalog to page 4

Model 101B(a13H) 4Pages

Catalog excerpts

All BCM SENSOR TECHNOLOGIES bv catalogs and technical brochures

Model 101B(a13H)
4Pages