Catalogs >
BCM SENSOR TECHNOLOGIES bv >
Model 101B(a12.6L)

Model 101B(a12.6L)
1 / 4Pages

Catalog excerpts

Model 101B(a12.6L) Low-Profile Pressure Sensors Description The 101B(a12.6L) is a low-profile weldable pressure sensor for medium pressure applications. Its pressure reference is selectable, including gauge (relative), absolute, and sealed gauge pressure. The 101B(a12.6L) is designed for pressure measurements involving hostile media compatible with 316 stainless steel. One of BCM’s piezoresistive sensor dies is housed in a stainless steel body where oil is filled. A stainless steel diaphragm isolates the filling oil from measured media. The method by which the 101B(a12.6L) can be fixed and sealed is either face welding or O-ring fitting. Depending on O-ring fitting, the sensor is convenient to be assembled into a system or to be disassembled from a system. measuring ranges: 60psi, ..., 500psi pressure references (types): gauge, absolute, and sealed gauge accuracy up to 0.25%fs either with or without temperature compensation compensated temperature range: 0~70 °C outstanding sensitivity and reliability excited by either current or voltage cost-effective Applications process control systems pneumatic and hydraulic systems biomedical instruments heating, ventilation, and air conditioning controls appliances and consumer electronics ship and marine systems aircraft and avionic systems Environmental Conditions position effect: < 0.1% of zero offset shift in any direction vibration effect: no change at 10 g (RMS), 20~2000 Hz BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.

Open the catalog to page 1

Model 101B(a12.6L) Low-Profile Pressure Sensors Technical Data Parameter pressure medium compatible with pressure diaphragm measuring ranges pressure types gauge (standard), absolute, sealed gauge proof pressure burst pressure full scale output (fso) zero offset long-term stability input resistance 6~20 (for voltage excitation), 3~6 (for current excitation) output resistance insulation resistance operating temperature range storage temperature range compensated temperature range 0~70 (available only for ranges ≥ 60psi) temperature coefficient of zero offset temperature coefficient of span...

Open the catalog to page 2

Model 101B(a12.6L) Low-Profile Pressure Sensors 8. Calculated as a rate of output change between 25°C and 70°C, and normalized by the output at 25°C, when the sensor is not temperature compensated. Only for the sensors with temperature compensation. If the sensors are not temperature compensated, their temperature coefficient of zero offset or span will be 0.1%fs/°C. 9. Temperature coefficient of zero offset ≤ ±10%fs/100°C for sensors with no compensation. 10. Temperature coefficient of span ≤ -10%fs/100°C for sensors with no compensation. 11. Response time for a 0 bar to fs step change,...

Open the catalog to page 3

Model 101B(a12.6L) Low-Profile Pressure Sensors Ordering Information ordering code: 101B(a12.6L)-28-G-II-T1-6P-v-(*) pressure ranges 28 = 0~400 psi 34 = 0~500 psi customized range available as an option pressure references G = gauge pressure (standard) A = absolute pressure S = sealed gauge pressure accuracy II = 0.25%fs III = 0.5%fs (standard) compensation T1 = with temperature compensation (standard) NT = without temperature compensation electrical interface 6P = 6 gold-plated copper pins, Ф0.45mm (standard) 6F = 6 colored PVC flexible wires, 100mm 4F = 4 colored PVC flexible wires, 100mm...

Open the catalog to page 4

Model 101B(a12.6L) 1 / 4Pages

Catalog excerpts

All BCM SENSOR TECHNOLOGIES bv catalogs and technical brochures

Model 101B(a12.6L)
1 / 4Pages