SENSOR Description The 664F(c) pressure sensors provide outstanding thermal stability and high accuracy, which is based on the BCM high-quality metal foil strain gauge. The sensor features all welded structure so there is no O-ring seal inside the sensor body. This model has inner-cavity structure which is suitable for pressure measurement of gases or dilute fluids. The sensor has its process connection and electronics housing connection with threads. The entire sensor body is made from stainless steel and is weldable in order to give more possibility for connection ways. Features • rugged and fully welded structure • measuring ranges: 25bar, ..., 400bar • reliable metal foil strain gauge technology • accuracy up to 0.05%fs • compensated temperature range: -20 ~ +85 °C • excited by either current or voltage Applications • industrial controls • hydraulic systems • compressors • food industry • process control systems Environmental Specifications • position effect: < 0.1% of zero offset shift in any direction • vibration effect: no change at 10 g (RMS), 20~2000 Hz • shock: 100 g, for 10 millisecond Electrical Interface BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 B-2900 Schoten - Antwerpen, BELGIUM website: www.bcmsensor.com email: [email protected]

SENSOR Technical Data Parameters General conditions for measurements: media temp. = 25°C ±1°C, ambient temp. = 25°C ±1°C, humidity = 50%RH ±10%RH, barometric pressure: 86~106 kPa, vibration = 0.1 g (1m/s/s) max. Notes: 1. The pressure medium should be compatible with wetted parts material and pressure diaphragm. 2. For customized pressure ranges, consult BCM. 3. “fs” refers to full scale pressure or rated pressure. 6. Calculated as a rate of output change between 25°C and 70°C, and normalized by the output at 25°C, when the sensor is not temperature compensated. 7. Response time for a 0 bar to...

SENSOR Ordering Information position (pos.) 1: model pos. 2: pressure ranges and references 0.5%fs 0.25%fs (standard) 0.1%fs (in case range ^ 60bar) 0.05%fs (in case output = 1mV/V, range Examples of Ordering Code standard sensor: 664F(c)-60barG-1.5mV/V-0.25%fs-1000Q-G1/2-FW customized sensor: model-pressure range-accuracy-process connection-customized parameter 664F(c)-60barG-1.5mV/V-0.25%fs-1000D-1/4NPT-FW (*): Customized mechanical interface = 1/4NPT. The listed specifications and dimensions are subject to change without prior notice. Industriepark Zone 4, Brechtsebaan 2 B-2900 Schoten - Antwerpen,...