Model 2911 Force Transducers Features - for tensile and compressive force measurement - range from 100 kg to 1000 kg - accuracy of 0.03 %fs - mild steel construction with nickel plated surface treatment - environment protection up to IP 67 Applications - hopper weighing - batch grading Description 2911 force transducers are designed to measure both tensile and compressive forces. The standard metric threads at each end of the transducers allow an easy installation with the standard rod end bearings. The capacities of 2911 range from 100 kg to 1000 kg with a measuring accuracy of 0.03%fs. Made from mild steel, 2911 force transducers can to produced to have a protection grade of IP 67. These force transducers feature compact and robust construction and are suitable to be used under harsh industrial environment. Typical applications of 2911 force transducers include hopper weighing systems and batch grading systems. Electrical Connection 2 x M16 x 1.5 excitation+, (red) signal-, (white) excitation-, (black) signal+, (green) shielding screen BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: [email protected]

Model 2911 Force Transducers Technical Data parameters safe load limit ultimate overload zero unbalance excitation (supply voltage) input resistance output resistance insulation resistance storage temp. range operating temp. range compensated temp. range temp. coefficient of sensitivity temp. coefficient of zero load cell body material mild steel mechanical interface refer to the dimensions on the datasheets electrical interface Φ5.7 mm, 4-conductor shielded cable, PVC jacket, 3.5 m environment protection unit weight to be confirmed when order The listed specifications are subject to change without...

Model 2911 Force Transducers Ordering Information position (pos.) 1: model 2911: made from mild steel pos. 4: non-linearity or accuracy class 0.03 %fs pos. 5: bridge resistance 350 Ω (Rin = 410±30 Ω, Rout = 350±10 Ω) pos. 6: mechanical interface Refer to the dimensions on the datasheets. Pos. 6 can be omitted from the ordering code. pos. 7: electrical interface cable, code = diameter(Φ)/number of conductors/cable jacket/cable length 5.7/4/PVC/3.5 = Φ5.7 mm, 4-conductors shielded, PVC, length = 3.5*m pos. 8: environment protection IP 66 (standard) IP 67 pos. 9: accessories for installation N =...