Catalogs >
BCM SENSOR TECHNOLOGIES bv >
1811 Non-Contact Rotary Torque Transducers

1811 Non-Contact Rotary Torque Transducers
3Pages

Catalog excerpts

1811 Non-Contact Rotary Torque Transducers - 1

Model 1811 Non-Contact Rotary Torque Transducers Description The model 1811 Rotary Torque Transducer is designed of non-contact between its rotor and stator by using the electromagnetic induction principle. The non-contact nature makes the model capable of operating at high speed for a long time. The no-electric-brush structure minimizes the need of mantainence. Therefore, this model is ideal for applications which require long term durability, such as rotational power transmission. The measuring torque capacities of model 1811 spans from 5Nm to 300000Nm with an accuracy of 0.5%fs. The output signal is frequency signal 10±5kHz (square wave, ±6V). The transducer can be coupled with a speed sensor on request, and its tachometric wheel measurs the rotational speed up to 60 pulses per round. 5Nm, ..., 300000Nm capacity maximum rotation speed of 8000rpm 0.5%fs measuring accuracy speed measurement available on request BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.c

Open the catalog to page 1

1811 Non-Contact Rotary Torque Transducers - 2

Model 1811 Non-Contact Rotary Torque Transducers BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.

Open the catalog to page 2

1811 Non-Contact Rotary Torque Transducers - 3

Model 1811 Non-Contact Rotary Torque Transducers Technical Data Units safe load limit ultimate overload 150 frequency signal of square wave of ±6V output signal frequency @ zero load frequency @ clockwise fs maximum rotation speed speed measurement* power supply load current response time storage temp. range operating temp. range compensated temp. range temp. coefficient of span temp. coefficient of zero mild steel environment protection mechanical interface refer to the dimensions drawing electrical interface unit weight 5-pin connector with detachable mating socket and 3m PVC cable kg...

Open the catalog to page 3