101B(A12.6H)
1 / 4Pages

Catalog excerpts

Model 101B(a12.6H) Pressure Sensors of Small Diameter Description The 101B(a12.6H) is a pressure sensor of a smaller diameter for general purpose. The 101B(a12.6H) is designed for pressure measurements involving hostile media compatible with 316L stainless steel. The sensor is based on BCM’s piezoresistive sensor die housed in a stainless steel body where oil is filled. The filling oil is isolated from measured media by a stainless steel diaphragm. Compared with the 101B(a19G), the 101B(a12.6H) has not only smaller dimensions but higher rated pressure up to 1000bar. Its pressure reference has two selections, sealed gauge and absolute pressure. The method by which the 101B(a12.6H) can be fixed and sealed is either face welding or O-ring fitting. Features • measuring ranges: 10bar, ..., 1000bar • pressure references: gauge, absolute, and sealed gauge pressure • accuracy up to 0.25%fs • either with or without temperature compensation • compensated temperature range: -10 ~ +70 °C • outstanding reliability • excited by either current or voltage Applications • process control systems • industrial controls • hydraulic controls • liquid level control • pressure transducers and transmitters • pressure calibrators Environmental Specifications • position effect: < 0.1% of zero offset shift in any direction • vibration effect: no change at 10 g (RMS) 20~2000 Hz • shock: 100 g, for 10 millisecond Industriepark Zone 4, Brechtsebaan 2 B-2900 Schoten - Antwerpen, BELGIUM website: www.bcmsensor.com email: sales@bcmsensor.com

Open the catalog to page 1

SENSOR Technical Data Parameters General conditions for measurements: media temp. = 25°C ±1°C, ambient temp. = 25°C ±1°C, humidity = 50%RH ±5%RH, barometric pressure: 860~1060mbar, max. vibration = 0.1 g (i.e. 0.98m/s/s). Notes: 1. For customized pressure ranges, consult BCM. 2. “fs” refers to full scale pressure. 3. Measured at fs, i.e. full scale pressure. 6. The temperature compensation of the sensor with a voltage excitation covers only compensation on zero offset. 7. Calculated as the maximum change of output signal over the compensated temperature range. 8. Response time for a 0 bar...

Open the catalog to page 2

SENSOR Circuit Diagram Electrical interface 4-colored flying wires (4F) wire color connection red excitation + Notes: (1) N.C.: Not connected. (2) All dimensions are in mm. (3) In case of alterations, refer to the label on the package. BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 B-2900 Schoten - Antwerpen, BELGIUM website: www.bcmsensor.com email: sales@bcmsensor.com

Open the catalog to page 3

SENSOR Ordering Informationposition (pos.) 1: model 101B(a12.6H) G: gauge pressure A: absolute pressure S: sealed gauge pos. 6: electrical interface 4F = 4 colored flying silicone rubber wires, 100mm (standard) 5P = 5 gold-plated copper pins, 00.5mm, 13mm If the required output signal is not mV, the electrical interface will be adjusted as the way confirmed on request. Examples of Ordering Code standard sensor: 101B(a12.6H)-25barG-50mV-0.25%fs-NT-5P-v customized sensor: 101B(a12.6H)-100barS-50mV-0.25%fs-NT-5F(100mm)-c-(*) (*): Customized electrical interface = 5 flying wires, 100mm wire...

Open the catalog to page 4

101B(A12.6H) 1 / 4Pages

Catalog excerpts

All BCM SENSOR TECHNOLOGIES bv catalogs and technical brochures

101B(A12.6H)
1 / 4Pages