SMA-IMX6QI-DVY SMARC Module Development Kit with pre-loaded Yocto OS operation system SMARC Development kit pre-loaded with Yocto OS Kit includes: (1). REV-SA01 SMARC Evaluation Carrier Board in 3.5” SBC Form Factor (2). SMA-IMX6QI Quad Core SMARC Module (3). Power Adapter: AC Input: 100-240V; DC Output: 12V (4). Power Cable (5). Mini-USB Cable (6). Pre-loaded OS on onboard eMMC Specifications Module Specification CPU/Chipset OS Form Factor Freescale® i.MX6 ARM Cortex A9 Quad Core Processor onboard Carrier Board Specification External I/O 1 x HDMI 1 x VGA 2 x RJ-45 LAN Ports 1 x RS-232 COM Port 2 x USB 1 x Mini-USB REV-SA01 SMARC Evaluation Carrier Board in 3.5” SBC Form Factor SMA-IMX6QI Quad Core SMARC Module Power Adapter: AC Input: 100-240V; DC Output: 12V Power Cable Mini-USB Cable 24-bit Single-channel LVDS and Backlight Connector 1 x SD Card Socket 1 x USB Speaker-out/Mic-in 1 x SATA 1 x RS-232 2 x CAN BUS Connector 1 x GPIO Connector 1 x Battery Connector Expansion Interfaces 1 x Mini-PCIe + 1 x SIM Card + 1 x SD Card Sockets Power Input Operating Temp. Storage Temp. Operating Humidity 5 ~ 90% Relative Humidity, Non-condensing Form Factor 3.5” Single Board Computer (SBC) SMARC Module installed on Carrier Board Ordering Info SMA-IMX6QI-DVY Development kit includes one SMA-IMX6QI SMARC Module (3.23” x 1.97”) and one REV-SA01 SMARC Evaluation Carrier Board in 3.5” SBC Form Factor. Cables and Power Adapter. Loaded with Yocto. Packed in Individual box. All specifications are subject to change