10 CELLS

10 CELLS

10 CELLS

Product catalog summary
Introduction
The document introduces the bbe 10cells, a field instrument designed for measuring living algae cells in ballast water. It emphasizes the importance of ballast water management due to its ecological impact and compliance with international regulations.

Specifications
The bbe 10cells measures living algae cells with a range of 1 to 20,000 cells/ml and a resolution of 1 cell/ml. It weighs 2.5 kg and has dimensions of 25.8 x 24.3 x 11.7 cm. The device operates on 110/240 V power supply and internal rechargeable batteries, with a battery life of over 300 measurement cycles per charge. It is protected under IP65 when closed and IP22 when open, and can store over 5 million data sets.

Procedures
The instrument uses a natural fluorescence method to measure algae cells, requiring no chemical pre-treatment. A 10 ml water sample is filtered and analyzed in less than a minute. The device provides a traffic light indicator for compliance with the IMO D-2 standard.

Compliance and Verification
The bbe 10cells complies with IMO D-2 regulations, requiring less than 10 living organisms per ml in ballast water. It has been verified through comparison with laboratory methods and tested on the research vessel "Meteor".

Features
The device is lightweight, robust, and easy to handle, with a 4.3" TFT screen and mobile use capabilities. It includes PDF report printing with customizable logos.

Applications
The bbe 10cells is suitable for use on ships, in harbors, and in laboratories. It is used by the BWMS industry for treatment optimization and compliance certifications, and has been tested by port authorities.

Contact Information
For further inquiries, contact bbe Moldaenke GmbH at [email protected] or via phone at +49 (0) 431 - 380 40-0.
See more

Catalog excerpts

10 CELLS-1

Fast & simple measurement of living cells in water An easy-to-operate field instrument for checking ballast water Direct measurement without preparation

 Open the catalog to page 1
10 CELLS-2

An instrument for the measurement of living algae cells in a water sample Ballast water is essential for the stability and manoeuvrability of ships cruising the seas. Marine plants, algae, animals, and microbes cross the oceans in the ships’ ballast water. Discharged at the port of destination, these organisms are released into a different environment. Here they act as invaders which can seriously disrupt the indigenous ecology with negative consequences for the economy. Regulations regarding ballast water discharge were implemented by the International Maritime Organisation (IMO) in September...

 Open the catalog to page 2
10 CELLS-3

Features Suitable measures such as ballast water treatment have to reduce the biomass in the transported water. The acceptable threshold is 10 cells/ml or less. The verification of the measures requires suitable and practical instrumentation. The 10cells method has been verified by comparison measurements with different laboratory methods, for example by the independent BWMS-certifier NIOZ: most sensitive device on the market detection limit of 1 living cell/ml measuring time less than 1 minute robust and easy handling 4.3" TFT screen mobile use - powered with internal batteries NOW! With PDF...

 Open the catalog to page 3
10 CELLS-4

Tested on a ballast water analysis cruise (Meteor cruise M116/2) Linear over a large concentration range Verified by microscopy DESCRIPTION living algae cells/ml Measuring range Dimensions (H x W x D) Power supply 25.8 x 24.3 x 11.7 cm 110/240 V – 50/60 Hz, internal rechargeable batteries Used for BWMS compliance certifications Protection class Tested by port authorities Storage temperature Environmental temperature Data capacity Power supply Lithium rechargeable batteries Battery life > 300 measure cycles per charge Best equipment for the size range between 10 µm and 50 µm Used by BWMS industry...

 Open the catalog to page 4

All Bbe Moldaenke GmbH catalogs and technical brochures

  1. BenthoTorch

    4  Pages

  2. AlgaeTorch

    5  Pages

  3. bbe IT SEES

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.