Series 600
10Pages

500 - Art.Nr.1023, 1025_V2 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:10.00pt "Times New Roman", serif; } .font1 { font:15.00pt "Times New Roman", serif; } .font2 { font:23.00pt "Times New Roman", serif; } .font3 { font:14.00pt "Verdana", sans-serif; } Bamberg + Bormann ELECTRONIC GmbH INSTRUCTION MANUAL MOVISTROB® Sries 600 High-power Stroboscope Type 600.00 BBE Bamberg + Bormann - Electronic GmbH WiebelsheidestraBe 45 D-59757 Arnsberg / Neheim-Hsten Tel.: 0049 (0)2932-547760 Fax: 0049 (0)2932-34675 Internet: http://www.bbe-electronic.de e-mail: info@bbe-electronic.de

500 - Art.Nr.1023, 1025_V2 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:6.00pt "Arial", sans-serif; } .font1 { font:9.00pt "Times New Roman", serif; } .font2 { font:10.00pt "Times New Roman", serif; } Bamberg + Bormann ELECTRONIC GmbH L Introduction Each MOVISTROB® product has to pass through various controls during its production phases and must also undergo very strict and conscientious function and quality tests before leaving the factory for delivery to our clients. We can assure you that the MOVISTROB® product you received is in strict conformity with...

500 - Art.Nr.1023, 1025_V2 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:9.00pt "Times New Roman", serif; } .font1 { font:10.00pt "Times New Roman", serif; } .font2 { font:18.00pt "Times New Roman", serif; } If you desire to study line-synchronous cycles, such as slip measurements, you can control the unit directly through the line frequency by pressing the LINE" button switch. You can also use the phase-shift control knob to change the phase position in this mode. The flash rate is continuously adjustable from 120 to 19200 flashes/minute, equivalent to 2 to...

500 - Art.Nr.1023, 1025_V2 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:9.00pt "Times New Roman", serif; } .font1 { font:10.00pt "Times New Roman", serif; } positively-directed edge of an impulse. The impulse current (maximum) should not exceed 100 V. The response cycle lies at 2,5 V (TTL). Caution: Always press the proper "Frequency Range Selector Button " (8) for the flash frequency range in which the external synchronization frequency lies. In any case if the control impulse frequency exceeds the preselected low range the next higher range should be...

500 - Art.Nr.1023, 1025_V2 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:9.00pt "Times New Roman", serif; } .font1 { font:10.00pt "Times New Roman", serif; } 5. Stroboscopic Principle With stroboscopy, high-speed periodic motion which cannot be followed by unassisted eyes can be made accessible for observation and its frequency measured. For this purpose the oscillating or rotating object is illuminated in a periodic series of light impulses (flashes) which are as brief as possible. The object then appears (at the appropriate flash frequency) to be...

500 - Art.Nr.1023, 1025_V2 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:9.00pt "Times New Roman", serif; } .font1 { font:10.00pt "Times New Roman", serif; } The opposite holds for e < 0. With increasing /e/ the angular speed w' of the apparent rotation rises. Finally the angle 2pe becomes so large that the mark on the rotating dise appears at two different places during two succeeding flashes. Other phenomena (described below) also occur. 5.4 Stopped Images of Phantom Objects Stopped images of rotating objects results from flash frequency periods Tn = nr,...

500 - Art.Nr.1023, 1025_V2 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:6.00pt "Arial", sans-serif; } .font1 { font:12.00pt "Arial", sans-serif; } .font2 { font:9.00pt "Times New Roman", serif; } .font3 { font:10.00pt "Times New Roman", serif; } Bamberg + Bormann ELECTRONIC GmbH Two fuse-holders are located in the control unit at 90° to each other; these are marked with the appropriate operating current. For 230V WE operation a 2.5A T fuse is installed; for 115V WE, a 4A T fuse. The unit is always delivered set up for either 230V/50-60 Hz operating current...

600 - Art.No. 1136, 1137_V2 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:9.00pt "Times New Roman", serif; } .font1 { font:10.00pt "Times New Roman", serif; } Technical Spcifications Power supply: Power consumption: Flash Tube: Light intensity: Model 600.00 230 / 115 V AC 50-60 Hz approx. 135 VA high energy, socket mounted Xenon quarz rod shapped flash bulb depending of frequency range Range I 5000 Lux Range II 4000 Lux Range III 2500 Lux at a distance of 0.5 m from light source. depending on frequency range 1 20^s II 15^s III 10^s 2 - 320 Hz / 120 - 19.200...

600 - Art.No. 1136, 1137_V2 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:9.00pt "Times New Roman", serif; } .font2 { font:10.00pt "Times New Roman", serif; } Bamberg + Bormann ELECTRONIC GmbH Flashlamps: 13 Flashlamp Type GS Flashlamp Type KS Dimensions: 270 x 220 x 160 (GS) 180 x 160 x 130 (KS) w x h x d Weight: 2,00 kg (GS) 1,40 kg (KS) length of connection 3,50 m standard cable: up to 10,0 m at request 13: Linear, high-output Xenon flash bulb B11038 (GS) or B11058 (KS) 14: " ON - OFF " - switch Right of...