S-Line Miniature safety edge system for automatic doors, barriers, public transport and transport/ emergency vehicles Small, robust, suitable for self-assembly Excellent mechanical load capacity, resistant to knocks and kinks Can be discreetly integrated thanks to slim design Excellent insulation and protection against moisture penetration

S-Line For automatic doors, barriers and vehicles Excellent safety levels with compact dimensions S-Line safety edges protect crushing and shearing points on doors and moving machine parts with a wide range of profile sizes and the corresponding switching devices. From contact strips in a gluable rubber profile without overtravel to the miniature safety edge with click-fit foot, they are all suitable for safety applications in accordance with EN ISO 13856-2. The S-Line system is extremely easy to install. Prefabricated or self-assembly S-Line safety edges are based on the tried-and-tested principle...

Contact strips and aluminium rails The right rail for every profile Extremely robust and available up to a length of 6 m Tinsel wire EPDM stack (conductive) EPDM sleeve (non-conductive) ENT-7: small and robust Resistant to knocks, kinks and water vapour Reliable in every application Situation Revolving door Solution The vertically mounted S-Line safety edges provide reliable protection against trapping and crushing in the door panels. S-Line is combined with Merkur 2 microwave motion detectors for activation and UniScan active infrared presence detectors as collision protection to form a comprehensive...

Ordering information Technical data Ordering information for prefabricated safety edges Prefabricated safety edges Temperature range Max. length Insulating strength Max. load capacity Dead zone Switching frequency Connection cable ELE016/012A0V Type See overview on page 2 1 Profile ends 1 = 8k2 resistor, with aluminium 2 = 2 cables, with aluminium 4 = 8k2 resistor, without aluminium 5 = 2 cables, without aluminium Length Length of safety edge [mm] Cable Length [m] / resistor (8K) left 8K Cable Length [m] / resistor (8K) right L total L active = L total – 50 Protection class Standards conformity...