Catalogs >
BAYKON Industrial Weighing Systems >
Baykon MX08 Multichannel System

Baykon MX08 Multichannel System
2Pages

Catalog excerpts

MX08 Multichannel System Digital weight data on to your ﬁeldbus Modbus RTU Ethernet TCP/IP Modbus TCP Profibus DP Profinet EtherNet/IP EtherCAT Powerlink Digital I/O RS232 RS485 Features • Communication: RS-232C, RS-485, Ethernet TCP/IP, Proﬁbus, Modbus RTU, Modbus TCP, Proﬁnet,EtherNet/IP, EtherCAT,Powerlink • High speed: Up to 800 conv/sec. • Anti-vibration ﬁlter: Adaptive antivibration active ﬁlter for fastand stable reading. • Weighing functions: Taring, zeroing, AZT, power on zero, tare memory at power off, motion detection. • eCal: Electronic calibration without test weights • Software support: Windows based BAYKON xFace software for calibration and setup via PC • Matched production: Direct replacement in Count mode without calibration • Local display: Easy service and local indication in site. • Digital I/O: Digital I/O's directly controlled by master PLC. MX08 is a multichannel transmitter is designed to integrate analog measuring data of multi weighing, force or torque measuring systems into control PLC/PC in proper digital data format. MX08 family is programmed and calibrated via PC by BAYKON xFace software. MX08 main advantages are; fast conversion rate, fast response and anti-vibration adaptive digital ﬁlter, weighing functions, powerful calibration facilities including eCal, calibration without test weight. Fully matched production provides direct replacement without calibration in Count mode. The maximum conﬁguration is; Fieldbus gateway, up to 8 Analog Digitizer, 8 Digital I/O units, Local Display unit. DIN rail instal

Open the catalog to page 1

MX08 Speciﬁcations MX08 AD: Analog Digitizer unit MX08 EN : Ethernet TCP/IP -Modbus TCP MX08 MB: Modbus RTU Gateway MX08 PB : Proﬁbus Gateway MX08 PN : Proﬁnet Gateway A/D Converter Type Conversion rate Minimum input voltage Minimum input sensitivity Analogue input range Linearity Resolution MX08 EI : EtherNet/IP MX08 EC : EtherCAT MX08 PL : Powerlink MX08 IO : Digital I/O MX08 DP : Display 24 bit Delta-Sigma ratiometric with integral analog and digital ﬁlters Up to 800 measurements per second < 1 mV 0.1 µV per interval 0 mV to 18 mV unipolar or -18 mV to 18 mV bipolar Within 0.0015% FS, 2...

Open the catalog to page 2

Baykon MX08 Multichannel System 2Pages

Catalog excerpts

All BAYKON Industrial Weighing Systems catalogs and technical brochures

Baykon MX08 Multichannel System
2Pages