*mydirectindustry

leak test bench

1 / 1 PageView full catalog

leak test bench

Product catalog summary

Technical Specifications:

Pressure test capability up to 4 bar maximum.

Instrumentation:

Pressure transmitter with full scale of 6 bar, class 0.25% accuracy.
Optional manometer for visual inspection.

Safety Devices:

Electric control for open doors.
Interlock system for open doors.
Test area equipped with metal lids to prevent shots and fluid leaks.
Emergency button for immediate shutdown.
Automatic test shutdown in case of component failure, oil leakage, or test bench warning.

Power Supply:

Electric: 230 Vac, 50 Hz, 600 W.
Air supply: 6 bar.
Water supply: less than 3.5 bar.

Dimensions and Weight:

Dimensions (L x W x H): 1700 x 1000 x 1350 mm.
Weight: Approximately 230 kg.

Color:

Standard Gray 7035 / natural stainless steel.

Notes:

Fluid and adapters are not included.

Functionality:

The B_22765 test bench is designed for leakage testing of heat exchangers and similar components using compressed air. Test specimens are placed in a tank, immersed in water, and filled with air. Operators can observe bubble formation through a window or control panel to verify leaks.

Operating Procedure:

Insert test specimen into the tank.
Fill the tank with water.
Seal the tank.
Set the test pressure or configure a pressure vs. time diagram.
Conduct the test.

Contact Information:

Headquarters: Via San Quintino 26/A, 10121 Torino, Italy.
Offices & Workshop: Via Riccardo Lombardi 9, 10028 Trofarello (TO), Italy.
Tel/Fax: +39 011 349 66 06
Email: [email protected]
Website: www.bavasrl.com

Catalog excerpts

leak test bench TECHNICAL DATA: • Pressure test: INSTRUMENTATION: • Pressure transmitter: • Or manometer f.s. 6 bar, cl 0,25% (only visual inspection) SAFETY DEVICES: • Open doors electric control • Open doors interlock • Test area with metal lids against shots and fluid leaks • Emergency button • Test shut down if component failure; oil leakage or test bench warning B_22765 test bench is designed to test leakage from: - heat exchangers - Other similar components The fluid test is compressed air. Test specimens are placed into test tank and immersed into water, than filled with air. Operator can double check situation looking at bubbles from window or looking control panel. The machine working cycle is: - Insertion of test specimen into tank - Filling tank with water - Sealing of tank - Setting test pressure or test pressure vs time diagram - Test itself POWER SUPPLY: • Electric: • Air: • Water: DIMENSIONS AND WEIGHT: • L, p, h: 1700 x 1000 x 1350 mm; • Raw load: ~ 230 kg COLOR: • Standard Gray 7035 / natural stainless steel NOTES: • Fluid and adapters not included S.r.l. Head quarter: Via San Quintino 26/A - 10121 Torino - Italy Offices&Workshop: Via Riccardo Lombardi 9 - 10028 Trofarello (TO) - Italy

Open the catalog to page 1

leak test bench

leak test bench

Catalog excerpts

All BAVA TESTING SOLUTIONS catalogs and technical brochures