Holding pressure test stand TECHNICAL DATA: • Pressure: • Temperature: • Reacting time: • Stability: INSTRUMENTATION: • Pressure transmitter: SAFETY DEVICES: • Open doors interlock • Emergency mushroom button • Test shuts down if component failure, oil leakage or test bench warning • Overpressure safety valve B_23074 test bench is designed to set and hold pressure into water – glycol circuits that are subjected to variation of temperature. Example of that are circuits for: • Heat exchangers stress test; • Heat exchangers pulsating pressure test. Connection system is made by 4 manifolds in order to connect 2 different heat exchangers. Working steps: • Connect UUT on test bench: • Flush and releases air; • Set working pressure and maintenance time; • Start, stop and empty circuit. POWER SUPPLY: • Electric: • Air: DIMENSIONS AND WEIGHT: • L, p, h (chamber): • Raw load: COLORE: • Standard Gray 7035 / White 9010 NOTE: • The test bench can w

PLC software realizes the bench control and the complete test report. The test bench can meet the requirements of Industry 4.0. Through a network connection (optional module) it allows: • Interface with external software in order to obtain information about status of the bench and carry out control and management operations; • Take advantage of the remote assistance service and remote control of the bench. GUI can be shown in multiple languages. S.r.l. Head quarter: Via San Quintino 26/A - 10121 Torino - Italy Offices&Workshop: Via Riccardo Lombardi 9 - 10028 Trofarello (TO) - Italy [email protected]...