Catalog excerpts
FLOW TEST BENCH TECHNICAL DATA: • Pressure peak: • Max flow: • DAS: INSTRUMENTATION: • N° 7 pressure transmitters: n° 5 relative: n° 2 differential: • N° 2 temperature transmitters: • N° 2 ultrasonic flow meters • N° 1 function generator The B_23201 test bench is designed for the characterization of valves or other fluid dynamic components used in aerospace industry, using a water/glycol mixture as a fluid. The machine is able to perform: • flow and/or pressure keeping tests; • proof test. Using a specific hydraulic circuit, this machine is able to generate a test cycle consisting of maintenance and controlled pressure ramps in accordance with the following standards: SAEJ343 - ISO18869 - ISO1402 - PED. Essentially, the bench consists of three trolleys: • Flow generation units; • Component test unit; • DAS console. • All operations are controlled by the control console, which also incorporates the DAS data acquisition and test report recording. 0÷20 barg ± 623 mbardiff 0° ÷ 150° C, cl. AA 0,27÷27 l/min, accuracy ± 0,05% f-s 0 1 ÷ 5 MHz, 20 ppm, 1kΩ SAFETY DEVICES: • Anti shock bench casing • Interlock on test compartment hatch • Mushroom emergency buttons • Automatic interruption of the test in case of, breakage, component leakage or malfunction of the bench • Over pressure switch for water lines • Over pressure valves for air line SUPPLIES: • Electric: • Process fluid: • Compressed air (if p<6 bar): • Nitrogen (if p>6 bar): DIMENSIONS AND WEIGHT: Console: • L, p, h: • Weight: Fg: • L, p, h: • Raw weight: Uut: • L, p, h: • Raw weight: COLOR: • Standard: NOTE: • Customized on demand. 400 Vac - 50 Hz 3F+N+PE, 3 + 1 kW 150 l (tank) 50 Nl/min. 50 Nl/min
Open the catalog to page 1The connection system consists of two (or more, on request) flexible supply pipes that convey the fluid to the component to be tested and one return. 5 relative pressure transducers, 2 differential pressure transducers, 2 flow meters and 2 temperature sensors, with acquired signal, allow the detection of the characteristic curves of the component under test. • The test bench is provided with an acquisition system equipped with a PC and a National Instruments DAS system. • The PC software, in addition to setting up the test, allows you to parameterize and control every aspect of the test to...
Open the catalog to page 2All BAVA TESTING SOLUTIONS catalogs and technical brochures
-
BURST TEST IN WATER BENCH
2 Pages
-
Holding pressure test stand
2 Pages
-
GAC TEST BENCH
2 Pages
-
HEAT EXCHANGERS TEST BENCH
2 Pages
-
air intake filter test bench
2 Pages
-
Impulsive test bench
2 Pages
-
Erosion test beNch
2 Pages
-
BURST TEST STAND
2 Pages
-
leak test bench
1 Pages
-
FLIGHT SURFACE ACTUATORS T.B
2 Pages
-
DATAACQUISITIONSYSTEM
4 Pages
-
Pressure test stand
2 Pages
-
NOZZLE FLOW TEST BENCH
2 Pages
-
ENGINE TEST CELLS
2 Pages
-
GBx PUMP FLOW TEST CART
2 Pages
-
industries
9 Pages
-
B_21472
2 Pages
-
RESEARCH & DEVELOPMENT
14 Pages
-
EQUIPMENT
18 Pages
-
AUTOMOTIVE
22 Pages
-
AEROSPACE
16 Pages