Feed & scavenge pump test bench
1 / 2Pages

Feed & scavenge pump test bench TECHNICAL DATA: • Fluid: • Temperature: • Inlet & recovery lines: • Well lines oil flow (2): • Well lines oil flow (5): • Aux line oil flow: • Main line oil flow: • Well oil flow: • Oil feed pressure: • Oil recovery pressure: • Air pressure: INSTRUMENTATION: • Flow: Bench designed for testing delivery and recovery pumps or combined engine oil circuit. The bench allows to carry out running-in operations, performance characterization, efficiency and drainage measurement, verification and calibration of 'trim' and 'relief' valves, with operational simulations of the flight altitude from 'sea level' to maximum tangency. All operations are supervised by the control console, which also incorporates the DAS data acquisition system and test report recording • Pressure: • Temperature: B_21086 olio MIL L 23699 30 ÷ 120 °C 7, 2 1,8 ÷ 94 l/min 1,1 ÷ 56 l/min 1,1 ÷ 56 l/min 3,7 ÷ 227 l/min 300 l/min (max) 50 ÷ 3500 kPa 100 ÷ 500 kPa 50 ÷ 600 kPa 1,8 ÷ 94 lpm, accuracy ± 0,05%, repeatability ± 0,05% 0 ÷ 1500 kPa; accuracy ± 0,05% < 120 °C, tcK, cl. 2 SAFETY DEVICES: • Inhibition of the exhaust circuit bench • Interlock on test compartment hatch • Mushroom emergency button • Automatic interruption of the test in case of breakage, component leakage or malfunction of the bench; • Maximum pressure valve • Thermostat of maximum temperature SUPPLIES: • Electric: • Compressed air: • Water: DIMENSIONS AND WEIGHT: • L, p, h: • Raw weight: COLOR: • Standard:

The test bench meets the requirements of Industry 4.0, (equipped with Wi-Fi card, allows connection to the company network / internet) and allows you to: • Interface with a third-party software in order to obtain information on the status of the bank and carry out control and management operations; take advantage of the remote assistance service by BAVA technicians; remote control of the bench compatible with the permissions of the corporate network. S.r.l. Head quarter: Via San Quintino 26/A - 10121 Torino - Italy Offices&Workshop: Via Riccardo Lombardi 9 - 10028 Trofarello (TO) - Italy...