BURST TEST IN WATER BENCH TECHNICAL DATA: • Max power: • Peak pressure: • Maximum flow rate: • Tank capacity: INSTRUMENTATION: • Nr. 2 relative pressure sensors: • Nr. 1 differential pressure sensor: • Nr. 1 ultrasonic flow meter: SAFETY DEVICES: • Inability to start test with opened gates • Magnetic restraint safety microswitch • Emergency mushroom buttons • INAIL certified maximum pressure valve POWER SUPPLY: • Voltage: The B_23128 test bench is designed for testing up to burst of plastic containers for the automotive industry (tanks and coolant fluid expansion tanks). The machine, with the various options, is able to perform: • Proof test; Burst and/or pressure keeping tests. Using a specific hydraulic circuit, the machine is able to generate a test cycle consisting of maintenance and controlled pressure ramps in accordance with the following standards: • Max current: • Compressed air: DIMENSIONS AND WEIGHTS: Console: • L, p, h: • Raw weight: Containment grating: • L, p, h: • Weight: COLOR: Console: • Standard: Containment grating: • Standard: SAEJ343 - ISO18869 - ISO1402 - PED. NOTES: • Customizable on demand.

Connection system consists of a flexible hose that conveys water to the testing tank. 3 pressure transducers, with acquired signal, are available for installation on the component under test. A single pressure signal, definable by the operator, can be used for hydraulic actuation. Test bench is equipped with an acquisition system PC and a National Instruments DAS system. The PC software, in addition to setting up the test, allows to parameterize and control every aspect of the test to be carried out. The DAS allows you to export, in the most common file formats, test report and his graphic transposition....